Wireless Remote Overview; Connecting The Wireless Remote To Your Tread Audio Box - Garmin TREAD Owner's Manual

Wireless Remote Overview

See the Important Safety and Product Information guide in the product box for product warnings and other
important information.
Radio sources: Press to tune to the previous station.
AUX sources: Press to decrease gain.
Other sources: Press to skip to the beginning of the track or to the previous track.
Radio sources: Press to tune to the next station.
AUX sources: Press to increase gain.
Other sources: Press to skip to the next track.
Press to decrease the volume.
Hold to quickly decrease the volume.
Press to increase the volume.
Hold to quickly increase the volume.
Press to cycle through the available sources.
Hold to pair with a stereo
Radio and AUX sources: Press to mute or un-mute.
Other sources: Press to pause or resume.

Connecting the Wireless Remote to your Tread Audio Box

1 Bring the Tread Audio System remote within 10 m (33 ft.) of the compatible stereo.
NOTE: Stay 10 m (33 ft.) away from other ANT
2 On the Tread Audio Box, enable Bluetooth discoverable mode.
3 On the wireless remote, hold
The remote searches for the stereo. When the remote pairs successfully, the status LED flashes green briefly
and turns off.
If the remote cannot find the stereo, the status LED flashes red briefly and turns off.
64
WARNING
(Connecting the Wireless Remote to your Tread Audio Box,
® devices while pairing.
until the status LED flashes green and red.
page 64).
Appendix