Connecting An Inreach Device; Sending A Text Message; Sos; Initiating An Sos Rescue - Garmin TREAD Owner's Manual

Hide thumbs Also See for TREAD:
Table of Contents

Advertisement

Connecting an inReach Device

1 Bring the inReach device within 3 m (10 ft.) of your Tread device.
2 On your Tread device, select Apps > Adventure > inReach.
3 Follow the on-screen instructions on your Tread device to complete the pairing process.
After the pairing process is complete, the inReach and Tread devices connect automatically when they are
within range.

Sending a Text Message

1 Select Apps > Adventure > inReach > Compose.
2 Select To:, and add one or more contacts.
3 Select Message:, and enter a message.
4 Select Send.

SOS

Before you can use the SOS function, you must have an active satellite subscription. Always test your device
before you use it outdoors.
Ensure you have a clear view of the sky when using the SOS function, because this feature requires satellite
access to operate properly.
Some jurisdictions regulate or prohibit the use of satellite communications devices. It is the responsibility of the
user to know and follow all applicable laws in the jurisdictions where the device is intended to be used.
During an emergency, you can use your Tread device to contact the Garmin Response
Pressing the SOS button sends a message to the Garmin Response team, and they notify the appropriate
emergency responders of your situation. You can communicate with the Garmin Response team during your
emergency while you wait for help to arrive. You should only use the SOS function in a real emergency situation.

Initiating an SOS Rescue

Before you can initiate an SOS rescue using your Tread navigator, you must pair it with a compatible inReach
satellite communicator
(Connecting an inReach Device,
While the device is in SOS mode, do not turn off or attempt to turn off the inReach satellite communicator. Doing
so could prevent this feature from operating properly and could delay receipt of assistance in the event of an
emergency.
1 Select Apps > Adventure > inReach.
2 Select
.
3 Wait for the SOS countdown.
The device sends a default message to the emergency response service with details about your location.
4 Reply to the confirmation message from the emergency response service.
Your reply lets the emergency response service know that you are capable of interacting with them during
the rescue.
For the first 10 minutes of your rescue, an updated location is sent to the emergency response service every
minute. To conserve battery power after the first 10 minutes, an updated location is sent every 10 minutes
when moving, and every 30 minutes when stationary.
10
WARNING
NOTICE
WARNING
page 10).
CAUTION
SM
center to request help.
Off-Road Navigation Features

Advertisement

Table of Contents
loading

Table of Contents