Table of Contents
Advertisement
USING YOUR VACUUM
IN UPRIGHT MODE
WHAT DOES THE
BRUSHROLL INDICATOR
LIGHT MEAN?
Solid Green
The brushroll is on and
working as it should.
Solid Red
There is a jam in the brushroll
area. Turn your vacuum off
and remove the blockage.
Flashing Red*
The motorized floor nozzle
is overheating. Turn your
vacuum off and wait for it to
cool down. Next time you are
vacuuming that surface, try
opening the Suction Control.
No Light
The brushroll is off because the
vacuum is in Hard Floor mode.
1
Plug power cord into outlet. Place foot on floor nozzle
* See Troubleshooting section for
and tilt handle back.
further instructions.
9
1-800-798-7398
STEP 1
STEP 2
2 Choose the appropriate setting.
Thick Carpet & Area Rug Cleaning
Set floor selector to Thick Carpet/Area
Rug.
Carpet & Low Pile Cleaning
Set floor selector to Carpet/Low Pile.
Hard Floor Cleaning
Set floor selector to Hard Floor.
NOTE: For deep cleaning per ASTM F 608 (embedded
dirt in carpets) please set to Carpet/Low Pile.
STEP 3
3 Press power button to turn vacuum on to
start cleaning. The brushroll will not spin
unless the wand is reclined.
s h a r kc l e a n . c o m
10
Advertisement
Table of Contents
