Table of Contents
Advertisement
ACCESSORY
PARTS
® Remote control unit........0000 00000
ee ee 1
@ Dry cell'batteries "AAA" size
IE@;ROS (UME4)s 5.22 shcatiosentece
cdots age wea ety aaeees 2
Go
@ PAL ->F
plug convert cable. ....... 00... 0c. eee ee 1
{Use when the antenna terminal in the receiving area is PAL)
INSERTING
BATTERIES IN THE REMOTE
CONTROL
UNIT
out the remote control unit and insert batteries as described
below:
@
insert batteries. Align the battery
@ Open the battery compartment lid on the bottom
side of the remote control unit. The lid will open
easily if you slide it toward
the bottom
while
pressing it with your thumb.
@
Insert the two accessory "AAA"
batteries in the
case, taking care to correctly match the polarities
as shown in the compartment.
©) Close the lid. The remote control unit has no inde-
pendent ON/OFF switch.
UM-4, "AAA" IEC RO3 1.5V
size dry cell batteries
NOTES:
@
When not using the remote control unit for long periods of time (one
month or more}, remove the batteries from the remote control unit to
prevent any possibility of battery leakage in the compartment.
@
Close the lid. The lid
@
Never use old and new batteries together. When replacing batteries,
will click into place.
always replace the two old batteries with two new ones.
.% '
x
@
Do not fay books or other objects on top of the remote control unit.
The operation keys may be depressed, causing 2 continuous flow of
battery power.
Open the lid. Press lightly with
your thum® while sliding the lid
off.
7
<ARB1184 >
Advertisement
Table of Contents
