Life Fitness Hammer Strength HD Elite Power Rack Assembly Instructions And Owner's Manual
  1. Manuals
  2. Brands
  3. Life Fitness Manuals
  4. Fitness Equipment
  5. Hammer Strength HD Elite Power Rack
  6. Assembly instructions and owner's manual

Life Fitness Hammer Strength HD Elite Power Rack Assembly Instructions And Owner's Manual

Single racks: hdlasr;hdldap;hdlhr;hdlmr;hdlpr. combo racks: hdlcr - pr/mr; hrs;hrl
Hide thumbs
Table of Contents

Advertisement

Quick Links

HD ELITE RACKS
Owner's Manual & Assembly Instructions
SINGLE RACKS: HDLASR * HDLDAP * HDLHR * HDLMR * HDLPR
COMBO RACKS: HDLCR - PR/MR * HRS * HRL
9128601 REV GA

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Hammer Strength HD Elite Power Rack and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Life Fitness Hammer Strength HD Elite Power Rack

Summary of Contents for Life Fitness Hammer Strength HD Elite Power Rack

  • Page 1 HD ELITE RACKS Owner’s Manual & Assembly Instructions SINGLE RACKS: HDLASR * HDLDAP * HDLHR * HDLMR * HDLPR COMBO RACKS: HDLCR - PR/MR * HRS * HRL 9128601 REV GA...
  • Page 3 M051-00K20-0426 Operation Manuals and other Product Information available at https://www.lftechsupport.com/web/document-library/documents ‫ عقوملا ىلع ةحاتم زاهجلا نع ىرخأ تامولعمو ليغشتلا ةلدأ‬https://www.lftechsupport.com/web/document-library/documents 操作マニュアルおよびその他の製品情報については、 https://www.lftechsupport.com/web/document-library/documents をご覧く ださい。 如需操作手册和其他产品信息，请登录：https://www.lftechsupport.com/web/document-library/documents 操作手冊和其他產品資訊請見 https://www.lftechsupport.com/web/document-library/documents 작동 설명서 및 기타 제품 정보는 https://www.lftechsupport.com/web/document-library/documents 에서 찾을 수 있습니다. Trobareu el manual de funcionament i altra informació de producte a https://www.lftechsupport.com/web/document-library/documents Mae Llawlyfrau Gweithredu a Gwybodaeth Arall am Beiriannau ar gael yn https://www.lftechsupport.com/web/document-library/ documents Die Betriebsanleitung und andere Produktinformationen erhalten Sie unter https://www.lftechsupport.com/web/document-library/...
  • Page 4 Operating Hours: 9.00h-17.00h (JAPAN) Service Email: kundenberatung@lifefitness.com Hong Kong customersupport@lifefitness.com Operating Hours: 08:30-16.30.h (MEZ) Sales/Marketing Email: Life Fitness Asia Pacific LTD Spain commercialsales@lifefitness.com 32/F, Global Trade Square Operating Hours: 7:00am-6:00pm (CST) Life Fitness IBERIA 21 Wong Chuk Hang Road ______________________________________ C/Frederic Mompou 5,1º1ª...

  • Page 5: Table Of Contents

    Table of Contents SECTION DESCRIPTION PAGE SAFETY INFORMATION ....................WARRANTY ........................CONTACT INFORMATION .................... PRODUCT LABELS ......................RACK OPTIONS ......................STORAGE, BASES AND CABLE STATIONS ..............UPRIGHTS, PULL-UPS AND RACK CONNECTORS ............. HARDWARE ........................ASSEMBLY INSTRUCTIONS STORAGE ASSEMBLY ..................BASE ASSEMBLY ....................BENCH ASSEMBLY ....................

  • Page 6: Safety Information

    This equipment is categorized as class S per EN ISO 20957-1. As such this equipment is only intended for commercial, institutional and/or studio facilities. It is not intended for home use. Contact LIFE FITNESS with any questions regarding this classification.
  • Page 7 6. Ensure that any person(s) making adjustments or performing maintenance or repair of any kind is qualified to do so. LIFE FITNESS will provide service and maintenance training at our corporate facility upon request or in the field if proper arrangements are made.

  • Page 8: Warranty

    WHO PAYS TRANSPORTATION & INSURANCE FOR SERVICE If the Product or any covered part must be returned to a service facility for repairs, We, Life Fitness, will pay all trans- portation and insurance charges for the first year. You are responsible for transportation and insurance charge after the first year.

  • Page 9: Contact Information

    1. Verify the symptom and review the operating instructions. The problem may be unfamiliarity with the product and its features and workouts. Locate and write down the serial number of the unit. Contact the nearest Life Fitness Customer Support Services Group. WARRANTY COVERAGE * There is no warranty coverage for labor on Strength Products.

  • Page 10: Product Labels

    PRODUCT LABELS ITEM NO. DESCRIPTION LOCATION BAR CATCH WARNING UPRIGHTS - MID FOLLOW PRECAUTIONS STORAGE - MID FOLLOW PRECAUTIONS (2) STORAGE - MID BODY WEIGHT STRAP WARNING STORAGE - MID NOT ASSEMBLED UPRIGHTS - TOP SERIAL NUMBER BASE WELDMENT...
  • Page 11 PRODUCT LABELS ITEM NO. DESCRIPTION LOCATION MAX CAPACITY - 200LB UPPER BAND PEGS MAX CAPACITY - 485LB TECHNIQUE TRAYS, STEP UP MOVING PARTS PINCH POINTS CAUTION: ADJUST ACCESSORY ANVIL PLATES DO NOT OFFSET FLEXIBLE PR STRAPS CABLE INSPECT CABLES...

  • Page 12: Rack Options

    RACK OPTIONS/ACCESSORIES Half Rack Half Rack Multi Power CableStations Short Base Long Base Rack Rack Name Product Code HDLCRDAP HDLHRS HDLHRL HDLMR HDLPR HDLLPD. HDLROW 2-Handle Pull-Up HDL2PU Arc Dual Pull-Up HDLARC Thick (2î) Grip Pull-Up HDLTPU Dual Pull-Up HDLDPU Straight Bar Pull-Up (standard) HDLSPU Thick Straight Bar Pull-Up...

  • Page 13: Storage, Bases And Cable Stations

    STORAGE, BASES AND CABLE STATIONS...

  • Page 14: Uprights, Pull-Ups And Rack Connectors

    UPRIGHTS, PULL-UP BARS AND RACK CONNECTORS...

  • Page 15: Hardware

    HARDWARE 3” RECTANGLE TUBING NUT 4” RECTANGLE TUBING NUT 1/4” X 3/4” BUTTON HEAD SOCKET SCREW 1/2” X 1-1/4” HEX HEAD BOLT 1/2” X 3” HEX HEAD BOLT 1/2” X 4” HEX HEAD BOLT 1/2” X 4” HEX HEAD BOLT W/NYLOCK PATCH 1/2”...

  • Page 16: Assembly Instructions

    ASSEMBLY INSTRUCTIONS STORAGE ASSEMBLY HR/MR/PR ITEM QTY. DESCRIPTION 1/4” X 3/4” BUTTON HEAD SOCKET SCREW GUSSET COVER SPIDER WELDMENT DIAMOND PLATE COMBO ITEM QTY. DESCRIPTION ITEM QTY. DESCRIPTION 3” RECTANGLE TUBING NUT BASE WELDMENT 1/4” X 3/4” BUTTON HEAD SOCKET SCREW HDL FOOT 1/2”...
  • Page 17 COMBO MS/LS ITEM QTY. DESCRIPTION ITEM QTY. DESCRIPTION 3” RECTANGLE TUBING NUT BASE WELDMENT 1/4” X 3/4” BUTTON HEAD SOCKET SCREW HDL FOOT 1/2” X 1-1/4” HEX HEAD BOLT RUBBER SLIPPER 1/2” LOCK WASHER MS DIAMOND PLATE MS SPIDER WELDMENT (LS NOT SHOWN) GUSSET COVER COMBO ITEM QTY.
  • Page 18 STORAGE ASSEMBLY HR/MR/PR ITEM QTY. DESCRIPTION 3” RECTANGLE TUBING NUT 1/2” X 1-1/4” HEX HEAD BOLT 1/2” X 4” HEX HEAD BOLT 1/2” X 4” HEX HEAD BOLT W/NYLOCK PATCH 1/2” LOCK WASHER 1/2” THIN LOCK NUT LEFT STORAGE UPRIGHT RIGHT STORAGE UPRIGHT SHORT WEIGHT HORN LONG WEIGHT HORN...
  • Page 19 COMBO KB/BP FRONT LOAD ITEM QTY. DESCRIPTION 3” RECTANGLE TUBING NUT 1/2” X 1-1/4” HEX HEAD BOLT 1/2” X 4” HEX HEAD BOLT 1/2” X 4” HEX HEAD BOLT W/NYLOCK PATCH 1/2” LOCK WASHER 1/2” THIN LOCK NUT STORAGE UPRIGHT SHORT WEIGHT HORN LONG WEIGHT HORN KETTLE BELL TRAY/BP (FRONT LOAD)
  • Page 20 COMBO 90 DEGREE ITEM QTY. DESCRIPTION 3” RECTANGLE TUBING NUT 1/2” X 1-1/4” HEX HEAD BOLT 1/2” X 4” HEX HEAD BOLT 1/2” X 4” HEX HEAD BOLT W/NYLOCK PATCH 1/2” LOCK WASHER 1/2” THIN LOCK NUT STORAGE UPRIGHT SHORT WEIGHT HORN LONG WEIGHT HORN HDL FOOT RUBBER SLIPPER...

  • Page 21: Base Assembly

    BASE ASSEMBLY ITEM QTY. DESCRIPTION 3” RECTANGLE TUBING NUT 1/2” X 1-1/4” HEX HEAD BOLT 1/2” LOCK WASHER LEFT BASE WELDMENT RIGHT BASE WELDMENT HDL FOOT RUBBER SLIPPER MR/PR ITEM QTY. DESCRIPTION 3” RECTANGLE TUBING NUT 1/2” X 1-1/4” HEX HEAD BOLT 1/2”...
  • Page 22 COMBO ITEM QTY. DESCRIPTION 3” RECTANGLE TUBING NUT 1/2” X 1-1/4” HEX HEAD BOLT 1/2” LOCK WASHER LEFT BASE ASSY. RIGHT BASE ASSY. HDL FOOT RUBBER SLIPPER LEFT SUMO BASE ASSY. (OPTIONAL) RIGHT SUMO BASE ASSY. (OPTIONAL) SUMO COMBO HR/DAP, PULLDOWN, ROW &...

  • Page 23: Bench Assembly

    BENCH ASSEMBLY BENCHES PULLDOWN, ROW ITEM QTY. DESCRIPTION 4” RECTANGLE TUBING NUT 1/2” X 1-1/4” HEX HEAD BOLT 1/2” LOCK WASHER BENCH ASSY. UPRIGHT ASSEMBLY ITEM QTY. DESCRIPTION 3” RECTANGLE TUBING NUT 1/2” X 1-1/4” HEX HEAD BOLT 1/2” LOCK WASHER LEFT UPRIGHT RIGHT UPRIGHT...
  • Page 24 ITEM QTY. DESCRIPTION 3” RECTANGLE TUBING NUT 1/2” X 1-1/4” HEX HEAD BOLT 1/2” LOCK WASHER LEFT UPRIGHT RIGHT UPRIGHT LEFT SHORT UPRIGHT RIGHT SHORT UPRIGHT ITEM QTY. DESCRIPTION 3” RECTANGLE TUBING NUT 1/2” X 1-1/4” HEX HEAD BOLT 1/2” LOCK WASHER LEFT UPRIGHT RIGHT UPRIGHT...

  • Page 25: Pull-Up Assembly

    COMBO PR/MR ITEM QTY. DESCRIPTION 3” RECTANGLE TUBING NUT 1/2” X 1-1/4” HEX HEAD BOLT 1/2” LOCK WASHER LEFT PR UPRIGHT RIGHT PR UPRIGHT LEFT MR UPRIGHT RIGHT MR UPRIGHT SHORT LEFT MR UPRIGHT SHORT RIGHT MR UPRIGHT PULL-UP ASSEMBLY HR/MR/COMBO REMOVE ITEM QTY.
  • Page 26 3-HANDLE/WING WING PR/COMBO PR ONLY ITEM QTY. DESCRIPTION 3” RECTANGLE TUBING NUT 4” RECTANGLE TUBING NUT 1/2” X 1-1/4” HEX HEAD BOLT 1/2” LOCK WASHER PULL-UP BAR K PULL-UP BAR DAP/CABLE COLUMN/PULLDOWN/ROW ITEM QTY. DESCRIPTION 3” RECTANGLE TUBING NUT 1/2” X 1-1/4” HEX HEAD BOLT 1/2”...

  • Page 27: Crossmember Assembly

    CROSSMEMBER ASSEMBLY ITEM QTY. DESCRIPTION 3” RECTANGLE TUBING NUT 1/2” X 1-1/4” HEX HEAD BOLT 1/2” LOCK WASHER CROSSMEMBERS ITEM QTY. DESCRIPTION 3” RECTANGLE TUBING NUT 1/2” X 1-1/4” HEX HEAD BOLT 1/2” LOCK WASHER CROSSMEMBERS...
  • Page 28 COMBO ITEM QTY. DESCRIPTION 1/2” X 4” HEX HEAD BOLT 1/2” LOCK WASHER 1/2" THIN LOCK NUT CROSSMEMBERS...

  • Page 29: Rack Connector Assembly

    RACK CONNECTOR ASSEMBLY - IF EQUIPPED - - HDLRC-TS ITEM QTY. DESCRIPTION ITEM QTY. DESCRIPTION 1/2” X 1-1/4” HEX HEAD BOLT LEFT CONNECTOR 1/2" X 4" HEX HEAD BOLT RIGHT CONNECTOR 1/2” LOCK WASHER CONNECTOR TUBE 1/2" THIN LOCK NUT - HDLRC-SQ ITEM QTY.

  • Page 30: Anvil Plate Assembly

    PLATE ASSEMBLY 9 FOOT ONLY ITEM QTY. DESCRIPTION 3” RECTANGLE TUBING NUT 4" RECTANGLE TUBING NUT 1/2” X 1-1/4” HEX HEAD BOLT 1/2" X 4" HEX HEAD BOLT 1/2” LOCK WASHER 1/2" THIN LOCK NUT SPACER (9' FOOT ONLY) TOP ANVIL PLATE BOTTOM ANVIL PLATE 9 FOOT ONLY ITEM QTY.
  • Page 31 9 FOOT ONLY ITEM QTY. DESCRIPTION 3” RECTANGLE TUBING NUT 4" RECTANGLE TUBING NUT 1/2” X 1-1/4” HEX HEAD BOLT 1/2” LOCK WASHER SPACER (9' FOOT ONLY) TOP ANVIL PLATE BOTTOM ANVIL PLATE BACK ANVIL PLATE...

  • Page 32: Bar Hanger Assembly

    BAR HANGER ASSEMBLY - IF EQUIPPED - HR/MR/PR REMOVE ITEM QTY. DESCRIPTION 1/2" X 3" HEX HEAD BOLT 1/2” LOCK WASHER 1/2" THIN LOCK NUT HOLE PLUG BAR CHAIN (SMALL/LARGE) COMBO REMOVE ITEM QTY. DESCRIPTION 1/2" X 3" HEX HEAD BOLT 1/2”...

  • Page 33: Hang Accessories

    HANG ACCESSORIES UNIT ITEM QTY. DESCRIPTION BAR SUPPORT BAR CATCH - HR BAR SUPPORT BAR CATCH - MR/PR BAR CATCH - MR/PR REVERSE BAR SUPPORT (L/R)

  • Page 34: Cable Station Instructions

    CABLE STATION INSTRUCTIONS ATTACH BASE - PULL DOWN, ROW AND DAP ITEM QTY. DESCRIPTION 4" RECTANGLE TUBING NUT 1/2" X 1-1/4" HEX HEAD BOLT 1/2” X 4” HEX HEAD BOLT 1/2” LOCK WASHER 1/2" THIN LOCK NUT CROSSMEMBERS 3" X 3" END CAP ATTACH BASE - DAP ITEM QTY.
  • Page 35 ATTACH TOP PLATES - PULL DOWN, ROW AND DAP ITEM QTY. DESCRIPTION 3" RECTANGLE TUBING NUT 4" RECTANGLE TUBING NUT 1/2" X 1-1/4" HEX HEAD BOLT 1/2” LOCK WASHER TOP ANVIL PLATE ATTACH TOP BRACE - DAP ITEM QTY. DESCRIPTION 3"...
  • Page 36 ATTACH PULL UP - DAP ITEM QTY. DESCRIPTION 3" RECTANGLE TUBING NUT 1/2" X 1-1/4" HEX HEAD BOLT 1/2” LOCK WASHER PULL UP HANDLE TIGHTEN ALL HARDWARE Check to ensure all Hammer Locks are in place and that all hard- ware is tightened to the below specifications.

  • Page 37: Weight Stack Assembly

    CABLE STATION INSTRUCTIONS WEIGHT STACK ASSEMBLY REMOVE REAR SHROUD ITEM QTY. DESCRIPTION RIVET REAR SHROUD LOOSEN RETAINER SCREW ITEM QTY. DESCRIPTION RETAINER SCREW RELEASE RETAINER RINGS ITEM QTY. DESCRIPTION RETAINER RINGS...
  • Page 38 REMOVE GUIDE ROD RETAINERS ITEM QTY. DESCRIPTION GUIDE ROD RETAINERS REMOVE CABLE DRIVE ITEM QTY. DESCRIPTION RETAINER RING INCREMENTAL WEIGHT HEAD PLATE ASSEMBLY GUIDE ROD GUIDE ROD CUSHION SWITCH GUIDE RODS ITEM QTY. DESCRIPTION TEMPORARY GUIDE RODS...
  • Page 39 ADD WEIGHT PLATES ITEM UNIT QTY. DESCRIPTION CC/DAP 20LB WEIGHT PLATE PD/ROW SWITCH GUIDE RODS ITEM QTY. DESCRIPTION TEMPORARY GUIDE ROD GUIDE ROD REPLACE CABLE DRIVE ITEM QTY. DESCRIPTION RETAINER RING INCREMENTAL WEIGHT HEAD PLATE ASSEMBLY GUIDE ROD GUIDE ROD CUSHION...
  • Page 40 REPLACE GUIDE ROD RETAINERS ITEM QTY. DESCRIPTION GUIDE ROD RETAINERS REPLACE RETAINER RINGS ITEM QTY. DESCRIPTION RETAINER RINGS TIGHTEN RETAINER SCREW ITEM QTY. DESCRIPTION RETAINER SCREW...
  • Page 41 TIGHTEN CABLE ENSURE CABLE TERMINA- TIONS HAVE A MINIMUM ENGAGEMENT OF 1/2" (12.7mm). TIGHTEN JAM NUTS: 20-25 FT-LBS (27.1- 33.8Nm). REPLACE SHROUD ITEM QTY. DESCRIPTION RIVET REAR SHROUD ADD WEIGHT STACK LABELS ITEM DESCRIPTION WS LABEL/POUNDS WS LABEL/KILOGRAMS...

  • Page 42: Storage Rack Instructions

    STORAGE RACK INSTRUCTIONS HDLASR ASSEMBLE BASE ITEM QTY. DESCRIPTION 3" RECTANGLE TUBING NUT 1/2" X 1-1/4" HEX HEAD BOLT 1/2” LOCK WASHER HDL FOOT RUBBER SLIPPER BAR STORAGE WELDMENT LEFT BASE ASSY. RIGHT BASE ASSY. ATTACH UPRIGHTS ITEM QTY. DESCRIPTION 3"...

  • Page 43: Optional Equipment

    OPTIONAL EQUIPMENT POWER PIVOT - HR/MR/PR ITEM QTY. DESCRIPTION 3" RECTANGLE TUBING NUT 1/2" X 1-1/4" HEX HEAD BOLT 1/2” LOCK WASHER POWER PIVOT (ONE PER) BATTLE ROPE - HR/MR/PR ITEM QTY. DESCRIPTION 3" RECTANGLE TUBING NUT 1/2" X 1-1/4" HEX HEAD BOLT 1/2”...
  • Page 44 BAR STORAGE - HR/MR/PR ITEM QTY. DESCRIPTION 1/2" X 1-1/4" HEX HEAD BOLT 1/2” LOCK WASHER BAR STORAGE LONG WEIGHT HORN BAR CATCH STORAGE - HR/MR/PR ITEM QTY. DESCRIPTION 1/2" X 4" HEX HEAD BOLT W/ NYLOCK PATCH 1/2” LOCK WASHER 1/2"...
  • Page 45 UPPER BAND PEGS - HR/MR/PR ITEM QTY. DESCRIPTION 1/2" X 1-1/4" HEX HEAD BOLT 1/2” LOCK WASHER UPPER BAND PEGS (L/R) - HR/MR/PR ITEM QTY. DESCRIPTION DIP HANDLE BALL STORAGE WELDMENT - HR/MR/PR ITEM QTY. DESCRIPTION 1/2" X 1-1/4" HEX HEAD BOLT 1/2”...
  • Page 46 TECHNIQUE TRAYS - HR/MR/PR ITEM QTY. DESCRIPTION TECHNIQUE TRAYS STEP UP - HR/MR/PR ITEM QTY. DESCRIPTION STEP UP SPOTTER PLATFORMS - HR/MR/PR ITEM QTY. DESCRIPTION SPOTTER PLATFORMS...
  • Page 47 BRANDING PLATE - HR/MR/PR ITEM QTY. DESCRIPTION 1/2" X 1-1/4" HEX HEAD BOLT 1/2” LOCK WASHER BRANDING PLATE ASSY.
  • Page 48 OPTIONAL EQUIPMENT NORDIC HAMSTRING - HR/MR/PR ATTACH HANGER ITEM QTY. DESCRIPTION 1/2” LOCK WASHER NORDIC HAMSTRING HANGER WEIGHT HORN 1/2" X 4-1/2" HEX HEAD BOLT 1/2" THICK LOCK NUT ATTACH ANVIL PLATES ITEM QTY. DESCRIPTION ITEM QTY. DESCRIPTION 1/2" X 1-1/4" HEX HEAD BOLT RIGHT REAR NORDIC PLATE* 1/2”...
  • Page 49 OPTIONAL EQUIPMENT ROPE PULL - HR/MR/PR ATTACH LOWER PULLEY ITEM QTY. DESCRIPTION 3" RECTANGLE TUBING NUT 1/2" X 1-1/4" HEX HEAD BOLT 1/2” LOCK WASHER LOWER PULLEY ASSEMBLY ASSEMBLE UPPER PULLEY -RIGHT HAND SHOWN ITEM QTY. DESCRIPTION 1/2" X 4" HEX HEAD BOLT 1/2”...
  • Page 50 OPTIONAL EQUIPMENT SLIDING BAND PEG - HR/MR/PR REMOVE HOLE PLUGS ITEM QTY. DESCRIPTION HOLE PLUGS ADD BUSHINGS ITEM QTY. DESCRIPTION PLASTIC BUSHINGS ASSEMBLE TO RACK ITEM QTY. DESCRIPTION 1/2" X 1-1/4" HEX HEAD BOLT FENDER WASHER SLIDING PEG...
  • Page 51 OPTIONAL EQUIPMENT DOCK-N-LOCK - HR/MR/PR REMOVE HOLE PLUGS ITEM QTY. DESCRIPTION HOLE PLUG ASSEMBLE TO RACK - NO PLATFORM ITEM QTY. DESCRIPTION 1/2" X 3" HEX HEAD BOLT 1/2” LOCK WASHER 1/2" THIN LOCK NUT FENDER WASHER DOCK-N-LOCK WELDMENT ASSEMBLE TO RACK - WITH PLATFORM ITEM QTY.
  • Page 52 OPTIONAL EQUIPMENT SAFETY SQUAT HANDLES - HR/MR/PR ATTACH HANGER ITEM QTY. DESCRIPTION 1/2” LOCK WASHER HANGER WELDMENT WEIGHT HORN 1/2" X 4-1/2" HEX HEAD BOLT 1/2" THICK LOCK NUT PLACE SAFETY SQUAT HANDLES ITEM QTY. DESCRIPTION SAFETY SQUAT HANDLES...
  • Page 53 OPTIONAL EQUIPMENT WING - PR HANG RUNG ITEM QTY. DESCRIPTION 3" RECTANGLE TUBING NUT 1/2" X 1-1/4" HEX HEAD BOLT 1/2” LOCK WASHER WING RUNG RAISE RUNG/ATTACH BRACES ITEM QTY. DESCRIPTION 3" RECTANGLE TUBING NUT 4" RECTANGLE TUBING NUT 1/2" X 1-1/4" HEX HEAD BOLT 1/2”...
  • Page 54 OPTIONAL EQUIPMENT PERPENDICULAR BAND PEGS - PR TYPES ITEM DESCRIPTION PERP. BAND PEGS ASSY. SUMO PERP. BAND PEGS ASSY. INSTALL HOLE PLUGS ITEM QTY. DESCRIPTION HOLE PLUGS ASSEMBLE WELDMENT ITEM QTY. DESCRIPTION 1/2” LOCK WASHER BAND PEG 1/2" X 3-1/2" HEX HEAD BOLT BAND PEG WELDMENT...
  • Page 55 OPTIONAL EQUIPMENT STRAP BAR CATCH - PR ATTACH STRAP HANGER ITEM QTY. DESCRIPTION 1/2” LOCK WASHER HANGER WELDMENT WEIGHT HORN 1/2" X 4-1/2" HEX HEAD BOLT 1/2" THICK LOCK NUT PLACE STRAP CATCH ITEM QTY. DESCRIPTION STRAP CATCH...
  • Page 56 OPTIONAL EQUIPMENT SIDE MOUNT PULL UP - PR REMOVE HOLE PLUGS ITEM QTY. DESCRIPTION HOLE PLUGS LARGE HOLE PLUGS ATTACH PULL UP ITEM QTY. DESCRIPTION 1/2" X 1-1/4" HEX HEAD BOLT 1/2” LOCK WASHER SIDE MOUNT PULL UP...

  • Page 57: Cable Handling Guide

    Use of non certified “techs” note: Service warranties may be void if a non-Life Fitness certified technician performs ser- vice work. Replacement of any strength cables should be performed by a Life Fitness certified technician.

  • Page 58: Cable Inspection

    Cable Inspection Inspect cables daily and replace at first sign of wear or any of the following cable issues: FRACTURES Casing can crack, or fracture, under use. Any crack in the casing merits cable replacement even if no wire rope is exposed. Be especially observant for fractures near the components on the cable assembly.

  • Page 59: Bolt To Floor Guide

    ACTION Introduction Life Fitness designs its products to be stable when used as designed. Because strength training is dynamic, we can- not predict how users will ultimately use the products in all circumstances. Therefore, Life Fitness recommends that strength training equipment be secured to a solid, level surface to stabilize and eliminate rocking or tipping over. For some equipment, securing the equipment to the floor is REQUIRED.
  • Page 60 Competitor Product • The bolt down guidelines and procedures for Life Fitness products were determined by the company’s Engineer- ingand Installation Development groups. These guidelines include which anchors to use and positioning of the anchors are required for Life Fitness product.
  • Page 61 Pullout Force Life Fitness specifies Hilti™ static and dynamic anchors. According to the anchor manufacturer, the recommended design pullout force (in tension) for the specified anchors, when properly installed in cracked concrete, is provided in the side table. This table should be used for reference only; for additional and up-to-date information on the anchor capabilities or the design pullout force in other substrates, please consult Hilti directly at https://www.us.hilti.com.
  • Page 62 Static Anchor Procedure If it is possible that the length of your bolt will not provide CAUTION! the minimum requirement of 2.5” (63.5mm) of engagement, a longer anchor should be used. 1. Place unit into position to be mounted and cycle unit to set stance. 2.

  • Page 63: Maintenance Procedures

    Cables. Look for wear or damage and proper tension. Pay close attention at bends. Hardware. Check for loosening. Tighten as required. Frames. Inspect for wear and damage. Handgrips. Check for wear and damage. For paint chips. Fill in immediately with Life Fitness touch-up paint.
  • Page 64 LUBRICATE Lubricate guide rods with Break-Free® brand lubricant (part number SK50-P0005-0000). Apply the lubricant to a cotton cloth, and then run the cotton cloth up and down the guide rods as needed. NOTE: only a few drops of lubri- cant are required for each guide rod. ONCE A DAY 1.
  • Page 65 NEVER use benzene, gasoline, acetone or carbon tetrachloride on the shrouds. © 2017 Life Fitness, A division of Brunswick Corporation. All Rights Reserved. Life Fitness is a registered trademark of Brunswick Corporation. Gym Wipes® is a registered trademark of The 2XL Corporation. PureGreen 24 is a trademark of Pure Green , LLC.

Table of Contents