Table of Contents
Advertisement
Protection from overheating
The Eclipse generates a certain amount of heat and
requires ventilation. Slots and ventilation holes are
provided for ventilation purposes, and to ensure
reliable operation of the product. To prevent fire
hazards, these openings must never be blocked or
covered.
Follow the precautions listed below. If these
precautions are not followed, overheating or failure
may result. Overheating also shortens the working
life of all components.
o Do not block the ventilation slots in the sides
of the unit with any object, including paper,
cloths or curtains
o Avoid placing the unit in a built-in installation
place such as a bookcase or a rack unless you
can provide proper ventilation
o Do not operate the unit inside a cabinet unless
it has adequate ventilation (such as an open
back panel)
o Allow at least 12 in (300 mm) clearance
around the unit
WARNING:
ventilation slots in the chassis.
Do
not
obstruct
Lifting or moving
WARNING: Weighs 62 kg (137 lb)
per unit. Shipping weight is 83 kg
(183 lb) per amplifier crate, and
175 kg (390 lb) for a palletised
pair. Never lift the amplifier by
yourself.
Always use two people to unpack
or move the amplifier. Always
bend at the knees when lifting. Do
not strain your back.
Wiring to the Loudspeaker Terminals to
Class 2 Wiring (US Wiring Regulations)
This equipment has been classified as having a Class
2 loudspeaker output requiring wiring to connect
the output terminals to class 2 according to the
National Electrical Code. Consult a qualified installer
or electrical contractor for further information.
6
Advertisement
Table of Contents
