Halcro Eclipse mono Owner's Manual page 18

Connecting the external ground
The Eclipse mono is equipped with a separate
ground terminal (p13, fig C, ⑥), which may be used
to reduce hum and ripple in some circumstances.
The ground terminal has a green bezel, and is
located under the power supply compartment
toward the rear of the unit.
Using minimal path input
If you intend to use the minimal path input, please
read the Minimal Path Input section for important
information about achieving optimal performance.
Connecting the inputs
Read the Inputs section on page 14 to determine the
appropriate connection type(s) for your input
equipment. Connect the cables and set the selector
switch appropriately.
If you intend to use the minimal path input, please
read the Minimal Path Input section for important
information about achieving optimal performance.
Checking inputs
Ensure that all input cables are connected securely.
Connecting the mains supply cable
Ensure the main power cable is NOT connected to
the mains outlet. Ensure the amplifier's mains power
switch (p13, fig C, ②) is set to OFF. Connect the IEC
mains plug into the socket on the bottom of the
lower compartment, which houses the power supply
(p13, fig C, ①).
Continue to read the Operation section on the
following page before connecting to the mains
outlet.
Bridging
You may bridge the Halcro Eclipse amplifiers, for
details please email us at:
service@halcro.com
17