Table of Contents
Advertisement
Protection from fluids
The Halcro Eclipse amplifiers are designed for indoor
use only and are not protected against liquids. They
must not be exposed to dripping or splashing and no
objects filled with liquids, such as vases, should be
placed on them.
If liquid is accidentally spilled on the device,
immediately disconnect the unit from the mains.
Allow sufficient time for complete evaporation
before using the Eclipse again. If the liquid is
anything other than water, do not use the device
before a qualified service technician has examined it.
Cleaning may be performed with a slightly damp
cloth that has been wrung until nearly dry. Refer to
the section Cleaning on page 265.
WARNING: To reduce the risk of
fire or electric shock, do not
expose this equipment to rain or
moisture.
Do not allow liquids to enter the
unit
or
terminals.
contact
electrical
Service warnings
All compartments are sealed at the factory. If the
seals are broken, the warranty will be void and all
service costs will be charged to the owner.
DANGER:
serviceable parts. Do not attempt
to open any of the Eclipse
compartments
expose you to dangerous voltages
and will void the warranty.
Requires an appropriate fuse for continued
protection against the risk of fire (F 10A L 250V or F
15A L 110V). Never bypass or use any other type of
fuse. The fuse is located on the bottom of the lower
panel of the power supply compartment (p13, fig C,
⑦).
WARNING: Always replace the
fuse with the same type and
rating as specified: F 10A L 250V
or F 15A L 110V as appropriate.
Always disconnect the unit from
the mains before touching the
loudspeaker
replacing the fuse.
5
Contains
no
user
as
this
may
terminals
or
Advertisement
Table of Contents
