Motion Sensor Wiring To The I/O Port - MedeaWiz Sprite 4K DV-S4 User Manual

MedeaWiz® Sprite® 4K
.

Motion Sensor Wiring to the I/O Port

There are many possibilities to add a motion sensor to the Sprite® 4K.
Small PIR motion sensors are available that use 5 Volt power and have a TTL voltage output.
These can be powered directly from the Sprite's I/O port. Set the Sprite's Control Mode to
Trigger High No Interrupt or Trigger High Delayed. Note that you can't wire multiple Sprites to
one motion sensor due to the voltage drops of the added Sprites. Use a relay or a sensor with
dry contacts to trigger multiple Sprites. A relay example is in the MSA-B manual.
Wiring a 5 Volt motion sensor
We offer the MSA-B Stealth motion sensor for a plug-and-play solution.
Set the Sprite's Control Mode to Trigger High No Interrupt or Trigger High Delayed.
See the MSA-B manual for complete details.
25 | P a g e