MedeaWiz® Sprite® 4K
.
Restore Default Settings
Reset the Sprite® 4K back to the factory settings.
Select Factory Reset and press the green Enter key on the remote control. Then when the pop-
up window appears, select "Yes" and press "Enter" to reset the Sprite® to the factory settings.
Factory default language is English.
You can reset the Sprite® to factory defaults without viewing the monitor by these steps:
1) Remove the power plug for 10 seconds and then restore power.
2) Wait 10 seconds or longer for start-up to complete.
3) Press the Setup key on the remote control.
4) Press the down arrow key 9 times.
5) Press Enter 2 times.
17 |
P a g e