MedeaWiz® Sprite® 4K
.
Serial Feedback
Select one of the serial feedback types to report status to your serial control device.
Only applies if the setting Control Mode is set to Serial Control.
Full Reporting
The Sprite® 4K will echo any command received. A single hex byte is sent several times per
second representing the file number currently playing. When the end of a file is reached, a
single Hex byte 0xEE is sent.
Minimal Reporting
The Sprite® 4K will only report the file number playing once at the start of the file.
It will report 0xEE at the end of a file.
It will return data from a command request.
Command Request Only
The Sprite® 4K will only report data when a request command is received.
This can be useful if multiple Sprites or other devices using Addressing are sharing a serial bus.
15 |
P a g e