Accessories & Options - Yaesu FT-1000MP Operating Manual

General Information
FoR ee Ne psn a el Sr RL Cah Sh ARTS 2) age TEN REN Se Sof] Ng S RODE D Bop oie MeN E Gy ees Ee
Accessories & Options
Options
TCXO-4/TCXO-6 High-Stability
Master Reference Oscillators
For special applications and environments
where extra frequency stability is essential, such
as for long-term HF packet monitoring under wide
temperature variations, the TCXO-4 provides
+2.0-ppm stability, and the TCXO-6 provides
+0.5-ppm stability from 0 to +50°C for the master
reference oscillator.
MD-100,48sx Desk-Top Microphone
Designed especially to match the electrical and
cosmetic features of the FT-1000MP, the MD-
100asx has 600-Q impedance, and includes
up/down scanning ring and a large PTT switch
with latch.
SP-8 Loudspeaker with Audio Filters
and LL-7 Phone Patch Option
Selectable audio high- and lowpass filters to- ame eae Se ti
gether with a large loudspeaker complement the
superb audio characteristics of the FT-1000MP
with your choice of 12 different audio filtering
combinations. Two input terminals are provided
for multiple transceivers, with a front panel switch
to select between them. A (monaural) phone jack
is provided on the front panel to take advantage
of the audio filters with headphones.
With the optional LL-7 Phone Patch Unit instal-
led in the SP-8, the FT-1000MP can be patched
to the public telephone network. The LL-7 in-
cludes a hybrid transformer circuit to assure
proper impedance matches, and front panel gain
controls and level meter to set proper audio levels
on the telephone line.
YH-77STA Lightweight Stereo Head-
phones
Dual samarium-cobalt transducers with sensi-
tivity of 103dB/mW (+2dB, @1 kHz, 3522) provide
the perfect match for the FT-1000MP. During dual
receive with the YH-77STA, one receiver can be
monitored in each ear, allowing easy separation
of the signals from the two receivers (or the audio
can be mixed, if desired).
page 5