Chicago Electric 61972 Owner's Manual & Safety Instructions
  1. Manuals
  2. Brands
  3. Chicago Electric Manuals
  4. Saw
  5. 61972
  6. Owner's manual & safety instructions

Chicago Electric 61972 Owner's Manual & Safety Instructions

10" sliding compound miter saw
Hide thumbs Also See for 61972:

Advertisement

Table of Contents

Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
10" SLIDING COMPOUND
MITER SAW
Email our technical support at: productsupport@harborfreight.com
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
©
Copyright
2013 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
Note: Blade sold separately.
Visit our website at: http://www.harborfreight.com
®
. All rights reserved.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
17j
61972

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 61972 and is the answer not in the manual?

Questions and answers

Phyllis
January 30, 2025

How do I order parts for the 61972 miter saw ... Part #20

0
1 comments:
Phyllis O Tracy
January 30, 2025

I see it is part # 21 not 20

0
Jackie Clark
June 18, 2025

what is the inside dimension of the dust outlet?

0

Subscribe to Our Youtube Channel

Related Manuals for Chicago Electric 61972

Summary of Contents for Chicago Electric 61972

  • Page 1 (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference. 61972 10" SLIDING COMPOUND MITER SAW Note: Blade sold separately.

  • Page 2: Table Of Contents

    Indicates a hazardous situation which, if not avoided, could result in death or serious injury. Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury. Addresses practices not related to personal injury. Page 2 For technical questions, please call 1-888-866-5797. ITEM 61972...
  • Page 3 NEVER LEAVE TOOL RUNNING UNATTENDED. TURN POWER OFF. Don’t leave tool until it comes to a complete stop. ITEM 61972 For technical questions, please call 1-888-866-5797. Page 3...
  • Page 4 Do not change the plug in any way. Double insulated tools may be used in either of the 120 volt outlets shown in the preceding illustration. Outlets for 2-Prong Plug (See Outlets for 2-Prong Plug.) Page 4 For technical questions, please call 1-888-866-5797. ITEM 61972...
  • Page 5 DO NOT OPERATE WITH ANy GUARD DISABLED, DAMAGED, OR REMOVED. Moving guards must move freely and close instantly. ITEM 61972 For technical questions, please call 1-888-866-5797. Page 5...

  • Page 6: Safety

    If you feel any medical or physical symptoms related to vibration (such as tingling, numbness, and white or blue fingers), seek medical advice as soon as possible. SAVE THESE INSTRUCTIONS. Page 6 For technical questions, please call 1-888-866-5797. ITEM 61972...

  • Page 7: Setup

    Blade Tilt Range and Left Miter 0°  – 45° left Scale 1° per scale mark 5001571 List of Contents Description Compound Sliding Miter Saw Table Extensions Dust Collection Bag Wrench ITEM 61972 For technical questions, please call 1-888-866-5797. Page 7...
  • Page 8 Blade Lock Dust Collection Bag Blade Hold Down Clamp Kerf Board Miter Handle Table Bevel Angle Indicator Fence Miter Angle Miter Lock Indicator Handle Work piece Extension Support Figure A: Components Page 8 For technical questions, please call 1-888-866-5797. ITEM 61972...
  • Page 9 Also, the use of a saw table will make it easier to efficiently handle work materials and make more accurate cuts. ITEM 61972 For technical questions, please call 1-888-866-5797. Page 9...

  • Page 10: Operation

    30º, 45º, and 90º on both left and right sides. With the Table adjusted to the desired angle, place the work piece flush against the Fence, secure it with the Hold Down Clamp and make the cut. Page 10 For technical questions, please call 1-888-866-5797. ITEM 61972...
  • Page 11 Bevel Lock Lever. Making bevel cuts is discussed in more detail later in this manual. ITEM 61972 For technical questions, please call 1-888-866-5797. Page 11...
  • Page 12 —   u se light downward pressure. disconnect its power supply after use. Clean, If the material binds the blade, release the Trigger. then store the tool indoors out of children’s reach. Page 12 For technical questions, please call 1-888-866-5797. ITEM 61972...

  • Page 13: Maintenance

    Dull blades will cause increased tear-out WARNING! If the supply cord of this and ragged edges on the cuts. power tool is damaged, it must be replaced only by a qualified service technician. ITEM 61972 For technical questions, please call 1-888-866-5797. Page 13...
  • Page 14 Tighten the Arbor Bolt securely using the Wrench by turning it counterclockwise. Rotate the Center Cover back into place and tighten the Center Cover Fixing Bolt using the Wrench by turning it clockwise. Page 14 For technical questions, please call 1-888-866-5797. ITEM 61972...
  • Page 15 Angle at 45º left. Ensure that the left side of four screws and tighten them slightly. the Blade clears the Kerf Board. Tighten the four screws holding the Kerf Board in place. ITEM 61972 For technical questions, please call 1-888-866-5797. Page 15...
  • Page 16 2. Check condition of material and check or inappropriate blade compatibility of blade to material. is being used. Follow all safety precautions whenever diagnosing or servicing the tool. Disconnect power supply before service. Page 16 For technical questions, please call 1-888-866-5797. ITEM 61972...
  • Page 17 Note: If product has no serial number, record month and year of purchase instead. Note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. ITEM 61972 For technical questions, please call 1-888-866-5797. Page 17...

  • Page 18: Parts List And Diagram

    125 Rubber Sheath Spring 126 Terminal Bend Arm Blade Cover 127 Handle Down Part Flat Washer Bolt M6x10 128 Hex Key Lock Nut Bolt M6x20 129 Seal Ring Washer Dust Collector Page 18 For technical questions, please call 1-888-866-5797. ITEM 61972...
  • Page 19 Assembly Diagram 37 1 35 36 ITEM 61972 For technical questions, please call 1-888-866-5797. Page 19...

  • Page 20: Warranty

    Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.

Table of Contents

Save PDF