Table of Contents
Advertisement
5. TRANSPORTATION AND UNPACKING
■ 5.1 Precautions for Transportation
This accurately-adjusted instrument may become inoperable when being dropped or given shocks.
Take extra care when transporting it.
■ 5.2 Precautions for Unpacking
(1) Check the appearance of a carton before unpacking it.
(2) Be careful not to roughly handle the package when unpacking.
(3) Unpack the product carefully to prevent accidental drop when removing it from the package.
(4) Open the sealed bag in a clean environment so that the gas contact area is not exposed to moisture,
dust, etc.
(5) After unpacking, make sure that the product is intact and that the model matches your order.
(6) If any abnormality is found, contact your purchasing agent or our sales office.
6. INSTALLATION AND REMOVAL
■ 6.1 Installation
(1) ZT11 pressure sensor, to be connected with union fittings such as a UJR™/VCR
needs to be connected in a specified manner using a designated gasket. When connecting the
sensor to the pressure line, do not tighten the main case body with a pipe wrench or similar tool.
During installation, always use the hexagon part of the thread or the square (hexagon) part of the
main unit.
(2) In addition to its IP67 equivalent protection grade (connector mating condition/IEC 60529), the life
of this product can be extended by selecting a place without direct sunlight and with little humidity
and dust, and a place not easily exposed to oil or water.
Be careful not to block the air inlet on top of the case (see "4.
●
DIMENSIONS"). Otherwise, the specified performance cannot
be obtained.
Do not apply excessive force to the case during installation.
●
Never touch the gas contact area with your hands or blow on it.
●
Be careful not to damage the sealing surface.
Do not apply excessive force on or severely bend the M12-
●
connector cable or the connector coupling to be connected to
this product. Also, during wiring, be careful not to subject the
product to the cable weight.
CAUTION
11
integrated fitting,
®
TY-ZT11-004A Ver. 3
Advertisement
Table of Contents
