Table of Contents
Advertisement
4. DIMENSIONS
■ 4.1 Typical Dimensions
Single End
Air Inlet
(with filter)
* 2D matrix codes and alphabets laser-marked on the fitting or nut are used for the purpose of process control during
production at our factory and does not have an impact on product specifications.
* Type of pressure (gauge or absolute) can be easily identified by the color of the product label.
・Gauge pressure: Green
・Absolute pressure: Yellow-green
* QR code on the product label stores model and serial number information.
One M12 In/out
connector
Zero Trimmer
HEX.
Air Inlet
(with filter)
D=5
< Fig. 4-1 >
10
Flow Through
One M12 In/out
connector
Zero Trimmer
TY-ZT11-004A Ver. 3
Advertisement
Table of Contents
