ICON Health & Fitness Epic A17U User Manual page 9

6. Set the Seat Carriage (24) on the Seat Post (6)
and hold it in place.
Insert the Adjustment Knob (27) upward into the
Seat Post (6), and tighten the Adjustment Knob
into the Seat Carriage Block (30) inside the Seat
Carriage (24).
7. Orient the Front Shield Cover (7) and the Upright
(4) as shown. Slide the Front Shield Cover onto
the Upright.
While a second person holds the Upright (4)
near the Frame (1), tie the lower end of the wire
tie in the Upright to the Main Wire (58). Then,
pull the upper end of the wire tie until the Main
Wire is routed through the Upright.
Tip: To prevent the Main Wire (58) from
falling into the Upright (4), secure the Main
Wire with the wire tie.
Tip: Avoid pinching the Main Wire (58). Slide
the Upright (4) onto the Frame (1). Attach the
Upright with four M10 x 16mm Screws (74).
Then, slide the Front Shield Cover (7) downward
and press it onto the Left and Right Shields
(10, 11).
6
7
Wire Tie
4
7
74
Wire Tie
1
58
9
24
30
6
27
Avoid pinching the
Main Wire (58)
74
10, 11