Table of Contents
Advertisement
weslo.com
USER'S MANUAL
Model No. WLEX61115C.0
Serial No.
Write the serial number in the space
above for reference.
Serial Number Decal
ACTIVATE YOUR
WARRANTY
To register your product and
activate your warranty today,
go to iconservice.ca.
CUSTOMER SERVICE
Call toll-free 1-888-936-4266
Mon.–Fri. 7:30 a.m.–4:30 p.m. ET
(excluding holidays)
or email us at
customerservice@iconcanada.ca
Please do not contact the store.
CAUTION
Read all precautions and
instructions in this manual before
using this equipment. Keep this
manual for future reference.
Advertisement
Table of Contents
Related Manuals for ICON Health & Fitness Weslo pursuit g 3.1
Summary of Contents for ICON Health & Fitness Weslo pursuit g 3.1
- Page 1 weslo.com USER’S MANUAL Model No. WLEX61115C.0 Serial No. Write the serial number in the space above for reference. Serial Number Decal ACTIVATE YOUR WARRANTY To register your product and activate your warranty today, go to iconservice.ca. CUSTOMER SERVICE Call toll-free 1-888-936-4266 Mon.–Fri.
- Page 2 TABLE OF CONTENTS WARNING DECAL PLACEMENT ............. . .2 IMPORTANT PRECAUTIONS .
-
Page 3: Important Precautions
IMPORTANT PRECAUTIONS WARNING: To reduce the risk of serious injury, read all important precautions and instructions in this manual and all warnings on your exercise bike before using your exercise bike. ICON assumes no responsibility for personal injury or property damage sustained by or through the use of this product. -
Page 5: Before You Begin
BEFORE YOU BEGIN Thank you for selecting the WESLO PURSUIT G 3.1 manual. To help us assist you, note the product model ® exercise bike. The PURSUIT G 3.1 exercise bike number and serial number before contacting us. The provides a selection of features designed to make your model number and the location of the serial number workouts at home more effective and enjoyable. -
Page 6: Part Identification Chart
PART IDENTIFICATION CHART Use the drawings below to identify the small parts needed for assembly. The number in parentheses below each drawing is the key number of the part, from the PART LIST near the end of this manual. The number following the key number is the quantity needed for assembly. -
Page 7: Assembly
ASSEMBLY • Assembly requires two persons. • In addition to the included tool(s), assembly requires the following tools: • Place all parts in a cleared area and remove the one Phillips screwdriver packing materials. Do not dispose of the packing materials until you complete all assembly steps. - Page 8 3. Attach the Seat Frame (2) to the Frame (1) with four M8 x 20mm Screws (40); start all the Screws, and then tighten them. 4. Orient the Seat Carriage (4) and the Handlebar (5) as shown. Attach the Handlebar (5) to the Seat Carriage (4) with two M8 x 80mm Bolts (39) and two M8 Locknuts (35).
- Page 9 6. Insert the pin on the underside of the Seat Carriage (4) into the desired adjustment hole in the Seat Frame (2). Attach the Seat Carriage (4) to the Seat Frame (2) with the Carriage Plate (31) and two M8 x 55mm Screws (46). 7.
- Page 10 9. Have a second person hold the Upright (3) near the Frame (1). Locate the wire tie (A) in the Upright (3). Tie the lower end of the wire tie to the Reed Switch Wire (33). Next, pull the upper end of the wire tie until the Reed Switch Wire is routed through the Upright.
- Page 11 11. Untie and discard the wire tie on the Reed Switch Wire (33). While a second person holds the Console (8) near the Upright (3), connect the wire on the Console to the Reed Switch Wire (33). Insert the excess wire into the Upright (3) or into the Console (8).
-
Page 12: How To Use The Exercise Bike
HOW TO USE THE EXERCISE BIKE HOW TO ADJUST THE SEAT HOW TO LEVEL THE EXERCISE BIKE The seat can be adjusted forward or backward to the If the exercise bike position that is the most comfortable for you. rocks slightly on your floor during To adjust the seat, first remove the two indicated use, turn one or... - Page 13 CONSOLE DIAGRAM FEATURES OF THE CONSOLE The easy-to-use console features five modes that provide instant exercise feedback during your workouts. Scan (SCAN)—This mode displays the time, speed, distance, and calories modes, for a few seconds each, in a repeating cycle. Time (TMR)—This mode displays the elapsed time.
- Page 14 HOW TO USE THE CONSOLE Time, speed, distance, calories mode—To select one of these modes for continuous display, press Make sure that batteries (not included) are installed in the MODE button repeatedly until the name of the the console (see assembly step 10 on page 10). If desired mode appears in the display.
-
Page 15: Maintenance And Troubleshooting
MAINTENANCE AND TROUBLESHOOTING MAINTENANCE Next, locate the Reed Switch (33). Rotate the Pulley (24) until a Magnet (32) is aligned with the Reed Regular maintenance is important for optimal Switch. Loosen, but do not remove, the indicated performance and to reduce wear. Inspect and properly M4 x 19mm Screw (27). - Page 16 HOW TO ADJUST THE DRIVE BELT Next, loosen the two M10 Flange Locknuts (37)—one on each side of the Eddy Mechanism (22). Then, If the pedals slip while you are pedaling, even while the tighten the two M6 Nuts (38) until the Drive Belt (not resistance is adjusted to the highest setting, the drive shown) is tight.
-
Page 17: Exercise Guidelines
EXERCISE GUIDELINES Aerobic Exercise—If your goal is to strengthen your WARNING: cardiovascular system, you must perform aerobic Before beginning this exercise, which is activity that requires large amounts or any exercise program, consult your physi- of oxygen for prolonged periods of time. For aerobic cian. -
Page 18: Part List
PART LIST Model No. WLEX61115C.0 R0617A Key No. Qty. Description Key No. Qty. Description Frame M4 x 19mm Screw Seat Frame M10 x 65mm Bolt Upright Eyebolt Seat Carriage Tension Bracket Handlebar Carriage Plate Seat Magnet Backrest Reed Switch/Wire Console Clamp Left Shield M8 Locknut... -
Page 19: Exploded Drawing
EXPLODED DRAWING Model No. WLEX61115C.0 R0617A... -
Page 20: Ordering Replacement Parts
ORDERING REPLACEMENT PARTS To order replacement parts, please see the front cover of this manual. To help us assist you, be prepared to provide the following information when contacting us: • the model number and serial number of the product (see the front cover of this manual) •...