ICON Health & Fitness Epic A17U User Manual page 12

14. Identify the Left and Right Upright Covers
(14, 15) and orient them as shown.
Have a second person hold the Right Upright
Cover (15) near the right side of the Upright (4)
Connect the wire on the Receiver (59) to the
wire (A) in the Upright.
Insert the excess wire into the Upright (4).
Tip: Avoid pinching the wires. Press the Left
and Right Upright Covers (14, 15) together
around the Upright (4).
15. Identify the Left Pedal (21).
Using the included flat wrench, firmly tighten
the Left Pedal (21) counterclockwise into the
Left Crank Arm (19).
Firmly tighten the Right Pedal (not shown)
clockwise into the Right Crank Arm (not shown).
Adjust the strap on the Left Pedal (21) to the
desired position, and press the ends of the strap
onto the tabs on the Left Pedal. Adjust the
strap on the Right Pedal (not shown) in the
same way.
16. Plug the Power Adapter (67) into the receptacle
on the front of the exercise bike.
Note: To plug the Power Adapter (67) into an
outlet, see HOW TO PLUG IN THE POWER
ADAPTER on page 14.
17. After the exercise bike is assembled, inspect it to make sure that it is assembled correctly and that it
functions properly. Make sure that all parts are properly tightened before you use the exercise bike.
Note: Extra parts may be included. Place a mat under the exercise bike to protect the floor or carpet.
14
4
14
15
Strap
21
19
Tab
16
12
15
59
A
Avoid pinching
the wires
67