Luxman C-10X Owner's Manual page 30

How to use Remote Control
Remote control
The remote control should be aimed at the remote sensor
of this unit within the specified angle range as shown in the
illustration.
28
30 30
Effective distance:
approx. 5 meters
Dry cell
[How to load dry cells]
1. Remove the battery cover on the rear of the remote control.
Put your finger on the battery cover claw and slide the cover
downward to remove the cover.
2. Put 2 AAA batteries in the battery case as shown in the illus-
tration on the battery case in consideration of the polarity (⊕
and ⊖).
3. In the reverse order of battery cover removal, put the battery
cover back to the opening of the remote control and slide the
cover upward until it clicks
• Do not use a combination of new and old batteries together.
• There may be a case in which the voltages are different
between two batteries even though they are the same size.
Do not use batteries of different types together.
• If the remote control is not used for a long time (more than
1 month), the batteries should be removed from the case. If
battery fluid is leaking, wipe away the liquid from the case
before inserting new batteries.
• To discard exhausted batteries, follow the instructions from
your local authority.
Claw