Cancel Individual Louver Setting; Louver Open/Close - Hitachi PC-ARFG-E Installation & Operation Manual

FUNCTION MENU

5.15 CANCEL INDIVIDUAL LOUVER SETTING

1 Select "Individual Louver Setting" on the "Function Menu"
and press "OK".
Function Menu
Elevating Grille
Reset Filter Reminder Time
Filter Cleaning
FrostWash Setting
Individual Louver Setting
OK Enter
2 Select "Cancel Individual Louver Setting" and press "OK".
?
N O T E
If there is one indoor unit connected with the controller, Step4 is displayed.
Individual Louver Setting
Individual Louver Setting
Cancel Individual Louver Setting
OK Enter

5.16 LOUVER OPEN/CLOSE

This function is used to fully open louver for adjusting the
horizontal (left or right) direction of the air flow.
?
N O T E
• This function cannot be set when the air conditioner is ON.
• This function is invalid depending on the indoor unit type. Refer to the
user manual of indoor unit for details.
34 PMML0565 rev.0 - 09/2021
3 Press" ", " ", " ", or " " to select the indoor unit to cancel the
louver direction, and press "OK".
?
(Mon) 16:30
N O T E
The indoor unit displayed on the screen flashes if an individual louver is
set.
00-00
00-01
Back
00-02
OK Enter
4 Press " " or " " to select "Yes" and press "OK". Cancel the
individual louver setting and return to Step3.
?
N O T E
All the individual louver settings are canceled.
Back
Confirm
OK
1 Select "Louver Open/Close" on the "Function Menu" and
press "OK".
OK Enter
Cancel Individual Louver Setting
Select Unit to Set
Cancel individual louver setting?
Yes Cancel
Function Menu
Louver Open/Close
Ventilation
Total Heat Exchanger SET
Back
Back
(Mon) 16:30
Back