Function Menu; Simple Timer Setting - Hitachi PC-ARFG-E Installation & Operation Manual

FUNCTION MENU

5 FUNCTION MENU
?
N O T E
• Some functions cannot be set depending on the type, configuration,
and usage status of the indoor unit.
• If a function with " " is displayed, it means the function is not
supported and the setting is disabled.
• For the "Filter Cleaning" and "Motion Sensor Setting" function menu
display, please refer to the Operation Manual of the indoor unit.
Display the function menu
1 Select the "Function Menu" and press "OK". The "Function
Menu" screen is displayed.
Function Menu
Simple Timer
Operation Schedule
Power Savings Setting o
Night Quiet Operation
Power Saving/Night Quiet Schedule
OK Enter

5.1 SIMPLE TIMER SETTING

This function is used to start or stop the unit operation at the set
time.
The timer operation contents can be set from "Not Used", "Once"
or "Everyday".
?
N O T E
• If "Once" on the timer operation setting is selected, the setting content
changes automatically to "Not Used" after one timer operation.
• Do not set the same time for both ON/OFF timers.
• Scheduled operation (stop) is not possible while the remote control
is prohibited.
• When is displayed, scheduled operation (stop) is not available.
• Refer to "7.1 Adjusting date / time" to set the date and time.
9 PMML0565 rev.0 - 09/2021
2 Press " " or " " to select the item to set and press "OK".
Press " " to return to the "Menu" screen.
If the "Menu screen" remains unchanged for approximately
10 minutes, the screen returns to the home screen.
Various settings are retained even when the power is turned
off.
(Mon) 16:30
Back
Set the simple timer.
1 Select "Simple Timer" on the "Function Menu" screen and
press "OK".
When the current time has not been set yet, the "Adjusting
Date/Time" setting screen is displayed.
Enter
OK
" " or " "
2 Press
"Execute" ↔ "ON Time" ↔ "OFF Time" ↔ "
Everyday
OK Select
Function Menu
Simple Timer
Operation Schedule
Power Savings Setting o
Night Quiet Operation
Power Saving/Night Quiet Schedule
to select the setting item:
Simple Timer
Execute ON Time
v 08:00
(Mon) 16:30
Back
".
(Mon) 16:30
OFF Time OFF Time OFF Time OFF Time
18:00 18:00 18:00 18:00
Back