Fan Speed; Louver Swing Direction - Hitachi PC-ARFG-E Installation & Operation Manual

OPERATION

3.5 FAN SPEED

1 Press " " or " to select "SPEED".
Fan Speed
Temp Cool Fan Speed
2 By pressing " " or " ", the fan speed changes as follows.

3.6 LOUVER SWING DIRECTION

1 Press " " (On/Off). Make sure that the power is ON. Press
" " or " " and select "Louver".
2 By pressing " " or " ", the louver direction changes as
below diagram , and the direction of different types of louver
is displayed differently.
LCD
indication
: Auto swing operation will be started. At this time, the
louver icon on the LCD will keep swinging repeatedly.
6 PMML0565 rev.0 - 09/2021
Low L
Louver Menu
COOL, DRY
HEAT,FAN
Auto-swing
Auto
∧ ∨
High 2
∧ ∨
High 1
∧ ∨
Med
∧ ∨
Low 2
∧ ∨
Low
?
N O T E
• During dry operation, the fan speed is automatically changed to
"LOW" and cannot be changed to another fan speed. ("LOW" is NOT
displayed on the liquid crystal display (LCD) at this time. The present
setting status is displayed on the LCD.)
• Some of the fan speed settings as "High2" or "Auto" may not be
available depending on the indoor unit type
?
N O T E
• For the indoor unit without the auto louver mechanism, the indication
of "Louver" is NOT displayed on the LCD.
• The air flow angle is different for each indoor unit type. Check for
detailed information in each Operation Manual for indoor unit.
• The louver position on the LCD and the actual louver position may
not match during the Auto-Swing. To set the louver positions, set the
angle after checking the position on the LCD.
• The louver may NOT stop immediately after the switch is pressed.
A