Connecting The Handset And Headset; Attaching The Base - Polycom SoundPoint IP 500CS User Manual

Connecting the Handset and Headset

1
Connect the corresponding end of the
phone cord to the handset and the other
end of the cord to the handset jack on
the back of the SoundPoint IP 500CS .
2
Connect the headset to the headset
jack on the back of the SoundPoint
IP 500CS (optional).

Attaching the Base

1 Connect the cords of the equipment
to the jacks and lay the cords in the
grooved slots.
Optional
LAN
2 Align the two brackets with their
corresponding holes and snap them
together to lock the base to the phone.
PC HEADSET HANDSET
3