Kenwood VR Series Instruction Manual page 9

Connecting video components
Video inputs
{Yellow RCA
pin cord)
VIDEO IN
Audio inputs and outputs Video inputs and outputs
(Red and white RCA pin cords) (Yellow RCA pin cords)
Connecting DVD 6-channel jack
The sound input to DVD 6CH. INPUT is paired with the video
signa! input to 6CH. INPUT.
VAYKRE-V SERIES (ErvKM)
Even if your DVO player does not
have the 6-channel output facility,
can enjoy the 6-channel aud
con ing a multi-channel sur-
round processor to your DVD player.
Connecting the antennas
Antenna terminal connections
@ Push lever. © insert cord.
EY
'
AM loop antenna
The supplied loop antenna is for use indoors. Place it as far as possible from
the receiver, TV set, speaker cords and power cord, and adjust the direction
for best reception.
FM indoor antenna .
The supplied indoor antenna is for temporary use only. For stable signal
reception we recommend using an outdoor antenna. Disconnect the indoor
antenna when you connect one outdoors.
FM outdoor antenna
Lead the 75Q coaxial cable connected to the FM outdoor antenna into the
room and connect it to the FM 752 terminal.
b
FM outdoor antenna
'Use an antenna
adaptor
(Commercially
available}