Kenwood VR Series Instruction Manual page 8

Make connections as shown below.
Microcomputer malfunction
VIDEO 2/MONITOR jacks
Use as a VIDEO 2 jack
You can connect a video deck or the like to these jacks and perform
video playback and recording. The initial factory setting is "VIDEO 2."
Use as a MONITOR jack
VIDEO 2/MONITOR
os av saciar Ty Th
ITUIW a Eu
* Atthe same time the setting is switched to "MONITOR," the audio input
source switches to tuner and the video input source switches to VIDEO
ly
© To switch the setting back to "VIDEO 2," once again hold down the
VIDEO 2/MONITOR key for two seconds or more.
* If you decide to use the VIDEO 2/MONITOR jacks as MONITOR
jacks, make sure to delete the "VIDEO 2 (VCR2)" input from the preset
remote control (RC-RO608). rc-f)
Notes
1.Be sure to insert all connection cords securely. If their connections are
imperfect, the sound may not be produced or noise may interfere.
VA/KAF-V SERIES (En/KM)
Connecting audio components
Shape of AC outlets
SYSTEM CONTROL
Jacks Mare
To use these jacks as MONITOR
jacks, you must change the
appropriate setting.
OUT . :
assette deck or
=
"Record player
Po e