Download Print this page

Kenwood VR Series Instruction Manual page 17

Audio video surround receiver
Hide thumbs Also See for VR Series:

Advertisement

MULTI CONTROL
INPUT SELECTOR
AuDIog =e 3 8 ;
BAND-——
; > |
(AUTO) if
TUNING/SKIP
AC-RO711
Use the input selector to select the tuner.
or "FM" indicator
BA Use the BAND key to select the desired broadcast band.
Each press switches the band
as follows:
OFM
@ AM
art
1S0*
Use the AUTO key to select the desired tuning method.
Each press switches the tuning method as follows:
* Normally, set to "AUTO" (auto tuning). If the radio waves are weak
and there is a Jot of interference, switch to manual tuning. (With
manuattuning, stereo broadcasts will be received in monaural.)
| pac MULTI CONTROL (TUNING/SKIP) to select the
station
Frequency
Lights when a broadcast is
display
being received in stereo.
9 Q fom im] ~
=
"TUNED' is displayed
when a station is received
:
Thenextstation is tuned automatically.
Turn the knob (press the key) to select the
desired station.
Auto tuning
Manual tuning :
¢ Youcan also use the TUNING key on the remote control (RC-R0O711)
to make the selection.
VR/KRF-V SERIES {En/KM)
Presetting radio stations manually
MEMORY
MULTI CONTROL
Tune to the station you want to store.
Press the MEMORY key while receiving the station.
Blinks for 5 seconds
Lights for 5 seconds
Proceed to step E} within 5 seconds.
(if more than 5 seconds elapse, press the MEMORY key again).
Use the MULTI CONTROL to select one of the station
presets (1 - 40).
@] Press the MEMORY key to accept the setting.
*Repeat steps &@, &, & and G to store as many stations as
necessary.
* If you store a station at a previously used preset, the old station will
be replaced by the new one.
Receiving preset stations
RC-RO711
Use the remote control to select the tuner as the source.
¢ The remote control switches to the tuner operating mode.
rad the number of the preset you want to receive (up to
Press the numeric keys in the following order:
For "15", press
EB.
For "20", press
if you make a mistake entering a two digit number, press the +10
key several times to return to the original display and start again.

Advertisement

loading

This manual is also suitable for:

Krf-v seriesVr-306Vr-305Vr-355Krf-v6020Krf-v5020