Advertisement
Connector Panel & Interfaces
Touchscreen Display Connections
1. Connect the HDMI, DP, or VGA video cables between the monitor's HDMI, DP, or VGA input connector and your HDMI/DP/VGA video source. Tighten the video
cable's screws to prevent accidental disconnection when using the HDMI or VGA connector.
2. Connect the USB touch cable between the monitor's USB connector and your PC's USB port, or connect the VGA Y-cable
the monitor's VGA connector and your PC's COM (Serial) port. Tighten the USB cable's screws to prevent accidental disconnection.
3. Connect a 12 to 24V DC power supply to the monitor's input power jack. Elo offers a 12VDC power adapter with locking connector and regional power cable kits
separately.
4. The touchscreen display ships in an ON state, video should be displayed on your monitor once the cables are connected.
(o
ptional cable kit E810917) between
User Manual: ET1099L Touchscreen
UM600770 Rev A, page 6 of 30
Advertisement
