Table of Contents
Advertisement
OPERATION
Oven Control, Clock, and Timer
Your new control has a series of tones
that will sound at different times.
These tones may sound while you set
the control for an oven function, or at
the end of the oven function.
It will
also alert you that there may be a
problem
with the functions.
Below
are the types of tones and a brief
description
of each.
TONES
WHILE
SETTING
THE
CONTROL
- When you press a
touch pad, you will hear a beep. This
beep will let you know you have
placed enough pressure
on the pad
to activate
it.
END OF TIMED
CYCLE
TONE
-
At the end of a timed cooking
function,
you will hear 3 short beeps
followed
by 1 beep every 6 seconds.
This 6-second
beep will continue
to sound until the CLEAFI/OFF
pad is pressed,
or you may select
the special feature to cancel this
6-second
beep from sounding
at the
end of future cycles.
TO CANCEL
THE
6-SECOND
BEEP:
1. Press and hold the BAKE
and
BROIL
pads,
at the
same
time,
for 3 seconds,
until the
display
shows
"SF"
2. Press the HOUR/MIN
KITCHEN
TIMER
ON/OFF
pad.
The
display
will show
"CON
BEEP"
(continuous
beep)
3. Press the HOUR/MIN
KITCHEN
TIMER
ON/OFF
pad again.
The
display
will show
"BEEP"
(beep
canceled).
4. Press the START
pad.
If you would like to return the
6-second
beep, repeat steps above
until the display shows your choice
and press the START
pad.
ATTENTION
TONE
- This tone will
sound if you make an error or an
oversight
is made while setting an
oven function.
Examples would be:
a. Setting a clean cycle and the oven
door is not properly
closed.
b. Setting a function and not pressing
the START
pad.
c. Pressing an additional
function pad
without first setting a temperature
or time.
dm
"ERR"
will flash if you set an
invalid temperature. Press the
CLEAR/OFF
pad to clear the
control and reset your oven
function.
Any of these can be quickly identified
by watching
the display.
PREHEAT
TONE
- When you start
a bake operation,
the oven
automatically
starts to heat. When the
temperature
inside the oven reaches
the temperature
you have set, a tone
will sound to let you know the oven is
ready for baking.
If you set an oven function and the
control beeps while the display is
flashing
"F" and a number "F-4"
or
letter "FI,"
there may be a problem
with the control or oven. Simply press
the CLEAR/OFF
pad and wait about
an hour. Try setting the function
again. If the code repeats, write down
the code and call for service. Tell the
technician
what code was flashing.
18
Advertisement
Table of Contents
