Kenmore 911. 41485 Owner's Manual page 25

CARE ANDCLEANING
Self-Cleaning Cycle
The Clean Cycle, including cooldown
time, is automatically set for 4 hours,
but you may change this from 3 hours
if oven is lightly soiled, up to 5 hours if
oven is heavily soiled.
After the cycle, you may notice some
white ash in the oven. Just wipe it up
with a damp cloth or sponge.
If white spots remain, scrub them
with a soap-filled steel-wool pad. Be
sure to rinse thoroughly. These are
usually deposits of salt that cannot
be removed during the cycle.
If for any reason you are not
satisfied with the cleaning
results, just repeat the cycle.
1. Press the SELF
CLEAN pad. 4 hours
will show in the display.
2. If you want to change
the length of clean time,
press the NUMBER
pads.
3. Press the START pad.
Simply press the CLEAR/OFF pad.
You will need to wait for the oven
temperature to drop below the lock
temperature (approx. 1 hour) before
attempting to open the door. Locked
door will go out in the display.
1. Press the SELF
CLEAN pad.
.
If you want to change
the length of clean time,
press the NUMBER
pads.
3. Press the DELAY
START TIME pad.
.
Press the NUMBER
pads to set the time you
prefer the clean cycle to
start.
5. Press the START pad.
25