Table of Contents
Advertisement
4. Confirm if there are firewall restrictions on your home network. It
may be due to network reasons that the equipment cannot be
connected to our server normally in result the device is not online.
5. If you cannot identify the cause, please reset the device and
reconfigure the device network. Insert the reset pin into the reset hole
on the back for 5 seconds, and then add the device again according
to the above steps
NOTE:
camera should be reset in operating state.
Camera Installation
07
7.1 Place it on any flat surface: table, chair, TV
cabinet,etc.
7.2 Install with Mounting Bracket
1. Unscrew the mount base, drill holes in accordance with the holes
on the base, and tap the drywall anchors into the wall and screw the
mount base.
2. Attach the bracket to the base.
3. Screw the camera to the bracket and adjust the camera angle.
Unscrew the Mount Base
07
English
Screw the Mount Base on the Wall
Advertisement
Table of Contents
