Camera Installation - ZOSI C1PRO Quick Start Manual

NOTE: If it fails to add device, please check the following:
1. Hear "Wireless connection failed"? Please check if the WiFi password is
entered correctly.
2. Please check if the device is plugged in.
3. Make sure that the network connected to the mobile phone and the
device can access the Internet normally.
4. Confirm if there are firewall restrictions on your home network. It may be
due to network reasons that the equipment cannot be connected to our
server normally in result the device is not online.
5. If you cannot identify the cause, please reset the device and reconfigure
the device network. Insert the reset pin into the reset hole on the back for 5
seconds, and then add the device again according to the above steps
(Note: camera should be reset in operating state).
05

Camera Installation

5.1 You can place it on any flat surface: table, chair, TV cabinet, etc.
5.2 Install with Wall Mount Bracket:
(1) Unscrew the base plate, drill 3 holes in the wall according to the hole of
the base, and insert plastic wall plugs. Screw the base plate.
(2) Tighten the bracket.
(3) Install the camera on the bracket and adjust the camera angle.
English 4