Page 1
Camera C188: Lens ① Antenna ⑦ Warning Light Spotlights*2 ⑧ ② Microphone ⑤ Speaker ⑥ ④ IR-LEDs ③ C302: ⑥ Speaker ① Lens ⑦ Antenna ② Spotlights*2 ⑤ Microphone ③ IR-LEDs*4 ④...
Page 2
New Camera Pairing It is recommended that users conduct a power-on test before installation to ensure that each camera can work normally. If it fails, please contact our customer service. If you want to add a new camera or reset the camera, please follow the following steps.
Page 3
4.Double-click the searched cameras, or tick the camera and click WiFi Add. The status of IPC connected shows at the bottom of the page, and the corresponding monitoring video will display.
Page 4
NOTE: If all eight IPC channels have been connected and you need to connect other cameras, then you will need to delete one or more channels to add other cameras. Camera Installation Steps C188: 1. Adjust the camera antenna to keep it vertical to get the best reception.
Page 5
1. Mount the antenna 4. Adjust the angle 2. Insert wall plugs into 3. Install the camera the holes C302: 1. Screw the antenna onto the camera. Please keep the antenna vertical for best reception. Note: fold the camera bracket before installing the antenna so you can easily install the antenna as shown in the picture.
Page 6
field of view. 3.Install the camera within the receiving range of the recorder. 4.The camera can be used outdoors (protection rating IP66). NOTE: This camera is only compatible with ZOSI NVR.
Need help?
Do you have a question about the ZG1883M and is the answer not in the manual?
Questions and answers