Thermo Scientific 7451 Operating And Maintenance Manual page 94

User Control Definitions
(continued)
Thermo Scientific
d. Selecting 'Two page report' prints an information sheet first, which
includes the following;
• Profile name and path
• Run data file and path
• User name
• Date/time
• User Information Field name/contents
• Run start/stop "comments"
• Profile listing
• Alarm listing with time of occurrence
The second page printed is the current screen graph display.
e. Selecting 'Multi-page report' prints the information sheet described
above as the first page.
The pages following are the entire Run graph, printed vertically for
best presentation. Horizontal scale may be selected on the Run
screen. The number of pages to be printed in horizontal scale is
indicated on the print-out selection window.
• Stop/Exit button stops a Run in progress, or exits the Run screen after
a Run has ended. The Run screen may be exited during Warm.
However, the Controlled Rate Freezer will maintain Warm Mode until
terminated by the user at the keypad.
• Auto-Scroll button is an On/Off button with the default being On.
This button has an automatic adjustment of the graph scale so that it
is always visible in the window. In addition, the most recent data is
automatically displayed.
• The Warm button appears when a Run is terminated. It allows the user
to initiate a Chamber Warm from the PC. This button has an On or
Off option. Click once to turn On; click again to turn Off.
• Manual override buttons are activated by pressing and holding the
mouse button. When the mouse button is released, the function is
deactivated. This button is only available during a profile Run.
a. The override Heat button turns the heater on.
b. The override Cool button turns the Cool solenoid on.
c. The override Cool+ button turns the Cool and Cool+ solenoids
on.
Section 10
PC Interface Software
Controlled Rate Freezer 10-11