Canon Oce Arizona 1200 Series User Manual page 177

3. Turn the cover plate over and clean the underside using a lint-free cloth and isopropyl alcohol.
4. Pour some flush (not alcohol) on a clean swab.
5. From the AMS Cleaning Assistant screen, press Start to apply vacuum to the suction head for 30
seconds and, while the suction is active, gently draw the swab across the top of the suction head
to remove any ink deposits.
IMPORTANT
It is extremely important that you NOT apply too much downward pressure on the
suction head. If you press down more than 2mm (0.078in) then it will no longer
perform printhead maintenance properly. Also, if a suction head is pressed down too
far you will need to place a service call to fix it.
6. Replace the AMS cover.
7. Press Finish Maintenance and then Back on the AMS Cleaning Assistant screen to complete the
cleaning cycle.
Océ Arizona 1200 Series
Cleaning the Automatic Maintenance System (AMS)
Chapter 12 - Printer Maintenance 177