Canon Oce Arizona 1200 Series User Manual page 108

Printing on Roll Media
8. Select the Media Advance Correction Factor
NOTE
Leave it at 50 unless you see light or dark lines of banding in the printed image (refer to
the next section "How to Set the Media Advance Correction Factor for more details).
9. When the displayed media values are correctly matched to the loaded media, click Close to exit
the Media Manager.
10. Click on the Roll icon in the menu bar of the Job Control module to activate the RMO print queue
(the icon will change from yellow to green).
Result
Any print jobs that are in the queue, not on hold, and marked as roll jobs will print. There is no
explicit confirmation required to start a roll media print job. Any roll media jobs in the print queue
will start to print immediately.
108 Chapter 7 - Roll Media Option
Océ Arizona 1200 Series