How To Name Your Spot Data In Illustrator - Canon Oce Arizona 1200 Series User Manual

How to Name Your Spot Data in Illustrator

In order for ProductionHouse to correctly distinguish and address Spot data, naming conventions
for this data must be adhered to both in the image editing creation stage and the Rip. While using
the default name Spot 1, is the simplest route requiring the fewest number of steps, there may be
instances when using something other than this is desirable. For instance, when data is created
by one individual and printed by another, naming spot data may make desired output results
more clear. As well, if English is not your native language, use a name that is more meaningful in
your language to be more effective. Please do not use the name "White" as this color flags
ProductionHouse to be treated in a particular manner not desired for this workflow.
Procedure
1. When you create a new Spot Swatch in Illustrator, edit the name and replace it with your
preferred name.
[86] Spot Ink Swatch
2. Edit the media to be used for this data in Media Manager, replacing the default name Spot 1, with
your newly created name.
[87] Change Name
Océ Arizona 1200 Series
How to Name Your Spot Data in Illustrator
Chapter 9 - How to Manage a White Ink Workflow 145