Using The Menu - Uniden BCD396T Owner's Manual

Using the Menu

Using the Menu
The scanner's menu lets you select options that let you
set up and use the scanner.
To use the menu, press
scanner. To select a menu item, rotate the scroll control
clockwise or counterclockwise. The currently-selected
menu item is highlighted with a bar on the display. When
the menu item you want to select is highlighted, briefly
press the scroll control to select it. To back up a level,
press . To exit the menu mode, press
Menu
the L/O key.
This table shows the scanner's menu structure. To find
information about a particular menu setting in this
manual, go to the page number shown in parentheses
next to the setting.
Note: Not all of the options shown in this table may
appear at the same time. To view all available options on
any screen, rotate the scroll control.
Menu Item Submenu
Select System
-- M E N U --
System1
Program System
System2
Srch/CloCall Opt
System3
Search for ...
Srch/CloCall Opt
-- M E N U --
Freq Lockouts
Program System
Broadcast Screen
Srch/CloCall Opt
CTCSS/DCS Search
Srch/CloCall Opt
Search for ...
Repeater Find
Max Auto Store
Set Delay Time
Set Modulation
Set Attenuator
Set Data Skip
Set Step
Adjust P25 Level
Search for ...
-- M E N U --
Service Search
Program System
Edit Service
Srch/CloCall Opt
Custom Search
Srch/CloCall Opt
Search for ...
Edit Custom
Search and Store
Note: the actual Select System submenu display will depend on what is
programmed into the scanner.
on the left side of the
Menu
Menu
(51)
(107)
(108)
(95)
(109)
(110)
(112)
(90) (110)
(110)
(111)
(112)
(81)
(94)
(98)
(96)
(97)
(100)
Using the Menu
again or
49