Table of Contents
Advertisement
Connecting the Power
Warning: The LRD 6699SWS is designed to operate only with
12V DC, negative ground power systems. Operation of
the unit on other voltages or polarities will cause damage
to the unit and may create a fire hazard.
1.
Insert the small connector into the jack on the side of the unit.
2.
Insert the other end into the cigarette lighter socket of
your vehicle.
When installing the power cord, make sure that:
The socket is clean to allow proper contact.
The power cord does not block the antenna area on the back of the
unit.
Your unit also comes with ten power cord mounting clips. You can use
these clips to attach the power cord to the window frame or other parts of
the vehicle, keeping it neat and out of the way. Use the double-sided
foam tape squares to attach each clip. Slip the power cord into the clip to
hold it securely in place.
11
Advertisement
Table of Contents
