Table of Contents
Advertisement
To prevent damage to connecting hose
when installing hose to reel, sufficient
clearance must be provided from out-
side edge of sheave.
ATTACHING CONNECTING
HOSES
Connect one end of connecting hose
to material supply line source or
connection.
Assemble connecting hose to reel inlet
and secure. NOTE: A 90 degree swivel
adapter or street elbow may be required
in multiple reel bank installations.
REEL INSTALLATION AND
ADJUSTMENT
See Figure (2). The guide arm may be
positioned in 45 degree increments
as shown. For ease of operation and
increased hose life, the guide arm should
be positioned to minimize hose strain as
the delivery hose is pulled through the
roller outlet.
Four studs must be used to securely
attach the guide arm.
SAFETY INFORMATION
Read and understand all warnings, cau-
tions and instructions before operating
this equipment. Extreme caution should
be used when operating this equipment
as personal injury and/or property dam-
age can result from equipment misuse.
Adequate personal protection is recom-
mended to prevent splashing of mate-
rial on the skin or in the eyes. ALWAYS
disconnect air coupler from pump when
the pump is not being used.
Form 404108
Page Number - 3
Advertisement
Table of Contents
