Lincoln 94000DS Series Owner's/Operator's Manual

NOTE 1: Operating maximum working pressure should not
exceed the pressure rating of the installed hose.
NOTE 2: Bare reel hose model 94100DS is designed to be
corrosion resistant when used in applications using water,
antifreeze solutions (ethylene Glycol or Polypropylene Gly-
col) and windshield wash solutions (Typically methyl alcohol
diluted with water).

DESCRIPTION

The 94000DS Series Reel is designed for hose storage wher-
ever longer length delivery hose is required. The reel can be
installed as a single unit or in multiple configurations.
Reel features include a reel latch that automatically locks at
desired positions as the hose is extended and releases with a
short pull on the hose

OWNER/OPERATOR RESPONSIBILITY

It is the owner/operator responsibility to properly use and
maintain this equipment.
The instructions and warnings contained in this manual shall
be read and understood by the owner/operator prior to operat-
ing this equipment.
If an owner/operator does not under stand English, the con-
tents of this manual shall be explained in the owner/operator
native language to assure the owner/operator comprehends.
© Indicates change
MAY - 2010
Models 94100DS, 94300DS, Model 94500DS
OWNER/OPERATOR MANUAL

SPECIFICATIONS

Maximum working pressure
Model 94100DS (Bare Reel)
Model 94300DS (Bare Reel)
Models 94500DS (Bare Reel)
Fluid type
Fluid Inlet
Fluid outlet
Sheave width
Sheave diameter
Drum diameter
Overall width
Overall height
Overall depth
Maximum hose capacities (Including hang down):
1/4" ID. Air/water/grease hose
3/8" ID. Air/water/grease hose
1/2" ID. Oil hose
RECOMMENDED REPLACEMENT HOSE SPECIFICATIONS
•
•
•
•
NOTE: Exceeding these capacities voids warranty. Refer to DE-
LIVERY HOSE INSTALLATION for proper hose to reel assembly.
Form 404108
Models 94300DS
Models 94500DS
Models 94100DS
Models 94300DS & 94100DS
Models 94500DS
Models 94300DS & 94100DS
Models 94500DS
Air/water low pressure hose with 250 psi working pressure and
1/2" NPT pipe thread for attachment to reel.
Oil hose medium pressure hose with 1500 psi working pressure
and 1/2" NPT pipe thread for attachment to reel.
Grease high pressure hose 1/4" I.D. with 5000 psi working pres-
sure and 3/8" NPT pipe thread for attachement to reel.
Grease high pressure hose 3/8" I.D. with 4000 psi working pres-
sure and 3/8" NPT pipe thread for attachement to reel.
It is the owner/operator responsibility to maintain the legibility
of all warning and instruction labels.
The owner/operator shall retain this manual for future refer-
ence to important warnings, operating and
maintenance instructions.
©
Systems which will be dispensing fluids under pressure may
need to be protected by using a thermal relief kit, which will
safely limit the pressures caused by thermal expansion.
Please contact your local Lincoln distributor and refer to
Service Page Section K5, Page 31 for more details. Failure
to include thermal relief protection may cause damage not
covered under Lincoln's warranty policy.
Section
Series "A"
BARE REEL
1000 PSI
4000 PSI
8000 PSI
Oil
Grease
Air & Water
1/2" NPT (Female)
3/8" NPT (Female)
1/2" NPT (Female)
3/8" NPT (Female)
4-1/2"
19-1/2"
12-5/8"
6-5/8"
23-3/4"
19-3/4"
60 ft.
60 ft.
50 ft.
- 74B
- E35
Page