Using The Exp 9200 As A Room Monitor - Uniden EXP 9200 User Manual

Paging the Base Unit While a Call is Holding
1. Press INT'COM on the Handset. If no answer, press TALK or INT'COM to
disconnect and return to the call ON HOLD.
2. At the Base Unit, press INT'COM to answer the page. Speak into the
microphone.
Note: The person at the Base Unit can join the conversation by pressing
the line number currently in use.
3. To turn off the Intercom, press SP. PHONE at the Base Unit.
— OR —
Press TALK on the Handset to return to the call ON HOLD.
Paging the Handset While a Call is Holding
1. Press INT'COM on the Base Unit. The call is placed on hold and the
Handset is paged.
2. At the Handset, press TALK or INT'COM to answer the page. Speak into the
microphone.
Note: The person at the Handset can join the conversation by pressing
the line number currently in use.
3. To turn off the Intercom, press TALK at the Handset.
—OR—
Press SP. PHONE on the Base Unit.

Using the EXP 9200 as a Room Monitor

You may use the EXP 9200 Handset to monitor activity near the Base Unit.
1. Remove the Handset from the Base Unit.
2. Press INT'COM on the Handset.
3. Press TALK on the Handset. A two-way monitor is now set up between the
Base Unit and the Handset.
Note: Press VOL on the Handset to adjust the Monitor Speaker to high or
low. Press MONITOR on the Handset to listen from the Monitor
Speaker.
To turn monitoring off
Press TALK at the Handset.
— OR —
Press SP. PHONE at the Base Unit.
22