Casio G-Shock GBD-200 Nero Operation Manual page 26

Timer
The timer counts down from a start time
specified by you. The watch performs a sound
and/or vibration operation when the end of the
countdown is reached.
The sound and/or vibration alert operations
●
will not be performed while battery power is
low.
Setting a Start Time
The start time can be set in 1-second units up
to 60 minutes.
1.
Enter the Timer Mode.
Navigating Between Modes
l
2.
Hold down (A) for at least two seconds.
This displays the number of timer repeats
(1 to 20) setting screen.
Number of repeats
3.
Use (A) and (C) to specify the number of
timer repeats (Auto Repeat).
4.
Press (B).
5.
Use (A) and (C) to specify the position of
the timer in the sequence.
Timer sequence
Watch Operation Guide 3506
6.
Press (B).
This moves the cursor to the minutes
setting.
7.
Use (A) and (C) to change the minutes
setting.
8.
Press (B).
This moves the cursor to the seconds
setting.
9.
Use (A) and (C) to change the seconds
setting.
10.
Press (B).
11.
Use (A) and (C) to select whether or not
you want to save your current settings.
[YES]
[NO]
[RETURN]
12.
Press (B) to complete the setting
operation.
After the setting operation is complete,
[SETTING COMPLETED] will appear for
a few seconds, and then the Timer Mode
screen will re-appear.
Note
To exit the timer setting operation at
●
any point, press (D) and advance to
step 11.
Minutes
Seconds
Saves current settings.
Discards current settings.
Returns to the number of
repeats setting.
Using the Timer
1.
Enter the Timer Mode.
Navigating Between Modes
l
2.
Use the operations below to perform a
timer operation.
Start
B
(Countdown starts)
Pause
B
Resume
B
(Time up)
The watch performs a sound and/or
●
vibration operation for 10 seconds
when the end of the countdown is
reached.
You can reset a paused countdown to
●
its start time, by pressing (D).
3.
Press any button to stop the sound and/or
vibration operation.
Using Programmable Timers
for Interval Training
Overview
You can configure settings for multiple timers
so they perform different count downs one
after the other to create an interval timer. You
can use the programmable timer to create a
sequence for interval training that alternates
jogging with sprinting.
For example, you could configure an interval
timer as shown below and have intervals
through repeat 10 times.
D
A
26