Table of Contents
Advertisement
Position
MAX
9
8
7
6
5
4
3
2
1
S
Cooking
•
Ensure that food is placed centrally
on the shelf and that there is sufficient
room around the baking tray / dish to
allow for maximum circulation.
•
Stand dishes on a suitably sized baking
tray on the shelf to prevent spillage onto
the oven base and to help reduce the
amount of cleaning required.
•
The material and finish of the baking
tray and dishes used will affect base
browning. Enamel, dark, heavy or
nonstick utensils increase base
browning. Shiny aluminium or polished
steel trays reflect the heat away and
reduce base browning.
•
When cooking more than one dish in the
oven, place dishes centrally on different
shelves rather than cluster several
dishes on one shelf. This will allow
the heat to circulate freely for the best
cooking results.
•
If you are cooking more than one tray
of similar items, for example cakes or
biscuits, swap the trays during cooking
or remove the top tray when the food on
it is cooked and move the lower tray to
the higher shelf to finish cooking.
•
Do not place baking trays directly on
the oven base as it interferes with the
oven air circulation and can lead to base
burning. Use the lower shelf position.
oven laMp(For main oven)
There is an oven lamp inside the oven
to illuminate the cooking area. Press the
lamp button to switch the lamp on or off.
Temperature(°C)
270
240
230
220
200
190
180
170
150
140
120
EN - 21
4.4 top oven ControlS
Top Oven Grill Burner Controls
Function Description
.....
CAUTION: Accessible parts may
become hot while the grill is in use.
Young children should be kept away. As
soon as you ignite the burner, place the grill
heat shield under the control panel. While
using gas grill function, please make sure
that the oven door is fully open.
Assembling the grill heat shield
Hold the heat shield with the warnings
facing upwards. There are two small slots
on the right and left side of the rear edge of
the shield, as shown in the figure.
There are two screws equipped with bushes
under the oven control panel. Align the
bushes with the assembly slots so that the
shield is stuck between the control panel
and the bush. Push the shield towards the
appliance until it is firmly in place.
Cooking
The grill burner can be adjusted between
the maximum and minimum positions.
When switching the grill burner off, turn the
knob in the clockwise direction until to the
"0" position.
Place a tray on the shelf below the grid to
collect any dripping oil or fat during grilling.
Place the wire grid on the topmost shelf,
making sure that the food does not touch
the grill burner.
Preheat the grill on the full setting for a few
Turn the grill burner control
knob counter-clockwise to set
to the required flame setting.
Advertisement
Table of Contents
