JVC RC-QC7 Service Manual page 28

RC-QC7 seena
«CD Traverse Mechanism Section )
mw Removing the CD Mechanism Section
when this system has been set to the
[PLAY] mode, the slide cam L on the left
side of the CD traverse mechanism should
be moved in the arrow A direction and
positioned to [A]. Under this condition, the
CD traverse mechanism will be lowered to
the position as shown in Fig. 5- 27).
Remove the four screws @ retaining the top cover (See
Fig. 5- 28).
. After pulling out the rod from the clamper, remove it
together with the top cover (See Figs. 5- 28 and 5- 28a).
A. Pull out the CD tray.
5. Remove the one screw
@ retaining the clamper (See
Fig. 5-29).
6. After moving the clamper in the arrow B direction and
shifting it in the arrow C direction, take it out from the
engagement section [B](See Fig. 5-29).
Top cover
Clamper
nN
wo
Clamper
Fig. 5-28
=
Engagement
Top cover
28 (No.10036)