JVC RC-QC7 Service Manual page 22

RC-QC7 B/E/EN/G
NO a
o
o
N
. By removing the one screw @ retaining the remote
System CPU P.C. board
Remote contro!
LCD &
system CPU
Remove the cassette mechanism unit and CD traverse
mechanism unit from the body.
From the connector CN904 on the LCD & system CPU
P.C. board, disconnect the 6- PIN connector wire
outgoing from the active hyper- bass P.C. board (See
Fig. 5-4).
From the front of the cassette mechanism unit, remove
the four screws © retaining the LCD & system CPU P.C.
board (See Fig. 5-4).
Cassette
mechanism unit
control sensor P.C. board, dismount this P.C. board
(See Fig. 5-4).
Cassette
mechanism unit
CN305
and CN306
on the head amp.
& mechanism
control P.C.
board on
the cassette mechanism
side
respectively from the connectors CN405 and CN406 on
the main amp. P.C. board (See Fig. 5-5).
Main amplifier board
Fig.5-5
ny —
4.
. Remove the front cabinet assembly.
. Pull out the cassette mechanism unit and CD traverse
. Remove the main amp. and LCD & system CPU P.C.
(See Fig. 5-6)
mechanism unit from the body.
boards.
From the top cover assembly, remove the eight screws
© retaining the cassette mechanism unit.
Fig.5-6
22 (No.10036)