Vents TwinFresh Style Wi-Fi User Manual page 18

Single-room reversible energy recovery ventilator
Hide thumbs Also See for TwinFresh Style Wi-Fi:
Table of Contents

Advertisement

The table below shows the buttons on the remote control with a detailed description of their purpose and functionality.
The
mode using DIP
Ventilator speed selection: Speed III-II-I respectively.
Regeneration mode
The rotation direction of both fans changes to opposite every 70 seconds. Heat recovery is performed in this
mode. The fan rotation direction depends on the position of the DIP switch 3.
Ventilation mode
The ventilator operates in the supply or extraction mode at a set speed. The fan rotation direction depends on the
position of the DIP switch 3.
Timer control buttons:
Party mode:
timer setting may be changed during setup of the unit on the mobile device.
default. The timer setting may be changed during setup of the unit on the mobile device.
The ventilation unit reverts to operation with a previous speed setting upon elapse of the set time period.
Press any speed setting key to deactivate the timer or press the timer control button once again.
VENTILATION UNIT OPERATION WITH THE MOBILE APPLICATION VENTS HOME
Download the Vents Home application and install it on the mobile device.
The ventilator with the factory settings operates as a Wi-Fi access point with the name FAN: + 16 characters of the ID number indicated
on the device casing under the front panel.
Wi-Fi access point password: 11111111.
Follow the instructions in the mobile app to connect the device. The app allows configuring the ventilator to connect via your home
Wi-Fi network and via a cloud server..
The ventilators are connected to the Smart Home system in accordance with the user manual for connecting to the Vents Home system.
18
VENTILATION UNIT OPERATION WITH THE REMOTE CONTROL
Standby
mode depends on the position of the DIP switch 2 (see section
switches"). The same button is used to reset alarms (Alarm) and to turn off the timers.
the timer activates operation of the unit at Speed III for a set time period, 4 hours by default. The
Night mode:
the timer activates operation of the ventilation unit at Speed I for a set time period, 8 hours by
Vents Home – App Store
CONTROLLING THE VENTILATOR USING THE SMART HOME SYSTEM
TwinFresh Style Wi-Fi (mini) (Frost) (M)
"Setting the ventilator operation
Vents Home – Play Market
www.ventilation-system.com

Advertisement

Table of Contents
loading

Table of Contents