7. Fix the back part of the indoor unit on the wall with the screws supplied with the mounting kit of the ventilator.
8. Route the power cable as figured below and connect the ventilator to power mains in compliance with the external wiring diagram,
"Connection to power
see section
XP3
XP2
XP1
9. After completion of the electrical connection reinstall the left
cover in site.
12
mains". Secure the power cable with the clamp.
N
L
H1 H2 IN1 IN2
Circuit board
A3
XP1
TwinFresh Style Wi-Fi (mini) (Frost) (M)
Circuit
board
A1
12V
IN
GND
www.ventilation-system.com