Removing And Fitting The Battery; Switching The Trimmer On/Off - Stihl FSA 90 Instruction Manual

English
► Check the position of cutting attachment. If it
needs adjustment:
3
► Loosen the screw (3).
► Move the carrying ring (2) up or down the
shaft until a correct balanced position is
reached.
► Tighten the screw (3) securely.
10 Removing and Fitting the
Battery
10.1 Inserting the Battery
1
2
► Insert the battery (1) up to the limit stop into
the battery compartment (2).
The battery (1) engages with a click and is
now locked.
10.2 Removing the Battery
► Set the brushcutter on a level surface.
► Keep one hand in front of the battery compart‐
ment so that the battery (2) cannot fall out.
1
► Press both locking levers (1).
The battery (2) is unlocked and can be
removed.
40
2
1
2

10 Removing and Fitting the Battery

11 Switching the Trimmer
On/Off
11.1 Switching On
FSA 90
► Hold the trimmer firmly with your right hand on
the control handle – wrap your thumb around
the handle.
► Hold the trimmer firmly with your the left hand
on the left handle – wrap your thumb around
the handle.
1
2
3
► Push the retaining latch (1) with your thumb to
position .
► Depress the trigger lockout (2) with your hand
and hold it there.
► Pull the trigger (3) with your index finger and
hold it there.
The motor accelerates and the cutting attach‐
ment rotates.
The speed of the cutting attachment is controlled
with the trigger.
FSA 90 R
► Hold the trimmer firmly with one hand on the
control handle – wrap your thumb around the
handle.
► Hold the trimmer firmly with the other hand on
the loop handle – wrap your thumb around the
handle.
1
3
► Push the retaining latch (1) with your thumb to
position .
► Depress the trigger lockout (2) with your hand
and hold it there.
1
2
0458-709-9821-D