Overview - Stihl FSA 120.0 Instruction Manual

Table of Contents

Advertisement

3 Overview

NOTICE
■ This symbol indicates dangers that can cause
damage to property.
► The measures indicated can avoid damage
to property.
2.3
Symbols in Text
This symbol refers to a chapter in this
instruction manual.
3
Overview
3.1
Brushcutter and battery
1
2
#
3
5
6
8
7
1 Locking lever
The locking lever holds the battery in the bat‐
tery compartment.
2 Battery compartment
The battery compartment holds the battery.
3 Carrying ring
The carrying ring is used to attach the carry‐
ing system.
4 Control handle
The control handle is used for operating,
holding and guiding the brushcutter.
0458-028-0101-A
11
4
10
9
12
13
14
15
18
17
19
16
#
5 Power setting switch
The power setting switch is used to select the
power level.
6 Ergo lever
The ergo lever holds the release slide in posi‐
tion when the trigger is released.
7 Trigger
The trigger switches the brushcutter on and
off.
8 Unlock button
The unlock button unlocks the trigger.
9 Wing screw
The wing screw secures the handlebar to the
handle support.
10 Handlebar
The handlebar connects the control handle
and the handle to the shaft.
11 Handle
The handle is used for holding and guiding
the brushcutter.
12 Shaft
The shaft connects all components.
13 Opening for stop pin
The opening for the stop pin accommodates
the stop pin.
14 Stop pin
The stop pin blocks the shaft when a cutting
attachment is being attached.
15 Gear housing
The gear housing encloses the gearbox.
16 Battery
The battery supplies power to the brushcutter.
17 LEDs
The LEDs indicate the state of charge of the
battery and any faults.
18 Pushbutton
The pushbutton activates the LEDs on the
battery. The pushbutton activates and deacti‐
vates the Bluetooth® interface (if available).
19 "BLUETOOTH
®
" LED (only for batteries with
)
The LED indicates the activation and deacti‐
vation of the Bluetooth® interface.
# Rating plate with the machine number
3.2
Deflectors and Cutting Attach‐
ments
The illustrations show examples of deflectors
and cutting attachments. Approved combinations
are listed in this instruction manual,
English
22.1.
3

Advertisement

Table of Contents
loading

Table of Contents