How To Move The Recumbent Bike - Horizon Fitness 5.0 R Owner's Manual

HOW TO MOVE THE RECUMBENT BIKE

Due to the weight of the Recumbent Bike, it is
recommended that two people move it. While one person
lifts the back of the Recumbent Bike, the second person
firmly holds the handlebar and tips the Recumbent Bike
forward until it rolls on the wheels. Carefully move the
Recumbent Bike to the desired location and then lower it.
If the Recumbent Bike rocks on the floor after being set
down, turn the leveling feet underneath the front or rear
stabilizer until the rocking motion is eliminated.
2 ft 60 cm
FRONT
2 ft 2 ft
BIKE
60 cm 60 cm
REAR
2 ft 60 cm
4
LOCATION OF THE
RECUMBENT BIKE
Place the Recumbent Bike on a
level surface. There should be
2 feet (60 cm) of each side
surround the Recumbent Bike.
Do not place the cycle in any
area that will block any vent or
air openings. The Recumbent
Bike should not be located in
a garage, covered patio, near
water or outdoors.
WARNING
To reduce the risk of injury, use extreme caution
while moving the Recumbent Bike. Do not attempt
to move it over uneven surfaces and make sure
there's a clear space of 24 inches (minimum) on all
sides of the equipment.
Leveling Feet